the showman 4,074 #1 Posted August 6, 2018 I've had a Wheelhorse dozerblade kicking about for a while and decided to sell it as we don't get any snow down here. i thought i would mount it on my Raider 12 just to make sure its all there and working. fitting the frame i noticed that it has two sets of holes so i'm guessing it will fit a short frame tractor as well , the angle pin was seized and the rod to change the angle was missing. An hour in the sweatbox and i freed off the pin and made another angle rod. All fitted and working now, its nice to sit in the seat and lift the blade and angle it 45.o left or right, and not have to get off the tractor. Quite impressed with the way it works, here's some photo's ( Norm ). 7 Cub Cadet, Triumph66, Alan and 4 others reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #2 Posted August 6, 2018 1 hour ago, the showman said: here's some photo's ( Norm ). I don't want it! I've got my own. Share this post Link to post Share on other sites
the showman 4,074 #3 Posted August 6, 2018 Not sure if this will work VID_20180806_170829.mp4 Share this post Link to post Share on other sites
HeadExam 1,783 #4 Posted August 7, 2018 As soon as you sell it you will need it for dirt work 1 Triumph66 reacted to this Share this post Link to post Share on other sites
Scottwilson 76 #5 Posted August 8, 2018 Well if it’s still about in September once tractorfest is out of the way and the penny pot starts to fill I’ll give you a shout 👍 Share this post Link to post Share on other sites
the showman 4,074 #6 Posted August 15, 2018 Come and see me at the show Scott Share this post Link to post Share on other sites
