expeatfarmer

Which class have you entered Norman, I can,t see the classes on line anymore?

Many thanks for the frost link, they have a three can golden cad system , currently out of stock.

Does anyone know who makes the aerosol paint that you can use for restoring the matt gold finish on car parts such as brake servos etc. ?

I suppose it will steer better if the back wheels are off the ground!

I see that home made loader is back on the auction site, fitted to an Mg6 converted from track drive to two wheel driver. Given that we all support innovation during the history of any machine that extends the use it should be attractive to someone, but I have some serious reservations as to safety, if this machine were to be used it would be front unstable and certainly not a machine i would want my grandsons to drive.

Nice find ! Must have been a very sheltering tree.

Well worth the weight Norman !

You know me Norm never one to make a fuss! Should be Ok for Edinburgh taking electric start machines.

Amazing collection of saws. Years ago I knew a South African Forester who showed me photographs of himself as a youngster using an 8Ft chain saw to cut a tunnel through a giant Sequoia so that they could drive timber trucks through it without having to cut the tree down.He was only about 5Ft tall and somehow ended up as head forester for the Earl of Annandale at Lockerbie.

Having injured my right arm slipping over in mud at new year workshop and tractor time has been curtailed and so I have been closely examining my old Ferrari which I am recommissioning . I pulled out the boot carpets and found some corrosion in the floor caused by overheating from the exhaust. Looking a bit harder I found a rust hole in part of the box section space frame that the silencer hangs off. 30 mm x 20 mm 1.5 mm box section easy peasy phone Tommy Graham the steel merchant get a piece off the shelf only want 9". No chance 3 month delivery and £60 for 6m! Looked on Google available in stainless but not mild steel just not listed anywhere. Tried Ferrari obsolete, slight lead on a London restorer that might have a bit. Frustrated I went back tom the workshop and had a ratch about in my scrap pile and there right in front of me was a 1.5m length of 30x20 x1.5 which I have actually had for years, it was part of a Thule roof bar system that I bought from a car boot sale, one piece of which I had used to make a roof mounted light bar for my Jeep CJ7. It was powder coated and bunged at each end with stoppers so inside is like new steel. Just shows that keeping hold of stuff you don't need today can pay off. ! Just need a new right arm so I can cut it and weld it in.

That is some collection of saws you have. How many do you have in total?

I am planning to go, hope to bring a few wheeled Ransomes tractors.

If you Google " Steiner 220 wiring diagram" you should be able to download or print one off. On the 420 and 425,s I have there is a voltage regulator under the dash with a multi plug try cleaning the terminals and check earth cables etc.

Hi Do you have any photos of the Turf Trak is it the two wheel drive version? I have a 420 and two 425 models , what is it that you need to sort?

Hi Rhys (Rocboni) might have one available.

On the basis that long shots do occasionally pay off it was worth trying but unfortunately this one sold quite quickly. Do you particularly want an MG40?

I have recently been researching restoration of magnesium alloys in readiness to restore the wheels on a Ferrari and I can tell you it is a minefield of does and don'ts because of fire risk and instant corrosion, I would avoid welding if you can and use either fire spring roll pins or fine threaded bar into a series of tapped holes as a means of coping with expansion of the alloy when warm in use. If you want to go down the metal repair route with sufficient pins in place you could use soft lead with a plasticine dam either side to retain it whilst cooling.

Happy birthday Neil hope you have a good day.

Safer than falling off a ladder!!!!!

I have one and used it for cutting overhanging branches over new garage tied a rope to each end and threw it over the branch, much safer than climbing a ladder as long as you keep clear of falling branches.

My neighbour has just bought one in kit form but it has cost him a fortune rebuilding his welder to cope with assembling it.

Merry Christmas to one and all, best wishes for a peaceful and happy New Year

which model/make magneto ?

Just received the details of this new show to be held at RHS Ingliston near Edinburgh airport on weekend of 25th March. Anybody have any plans to exhibit I thought I might take some crawlers.

That's good for some reason Cumbria doesn't do bread sauce.