Wallfish 698 #1 Posted November 18, 2014 Courtesy of Webhead 3 nigel, pmackellow and Stormin reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #2 Posted January 15, 2017 Is this the one you were talking about David ? Share this post Link to post Share on other sites
factory 487 #3 Posted January 15, 2017 I imported a pair of these chainsaws a few years ago, but as the original decals are long gone I'm not sure if they are Paul Bunyon saws or not. Here are some pictures of one of them. I have since seen this saw branded as both Paul Bunyan (spelling is correct) and the Chip-A-Saw, here are the decals from those. Does anyone know which is correct? David 1 pmackellow reacted to this Share this post Link to post Share on other sites
Wallfish 698 #4 Posted January 16, 2017 Both are correct, I have the Chip-A-Saw version. Also have the other version of a Chip-A-Saw Share this post Link to post Share on other sites
pmackellow 2,738 #5 Posted January 17, 2017 8 hours ago, Wallfish said: Both are correct, I have the Chip-A-Saw version. Also have the other version of a Chip-A-Saw Any photos please ? Share this post Link to post Share on other sites
factory 487 #6 Posted January 17, 2017 11 hours ago, pmackellow said: Any photos please ? Here are some pictures of the Paul Bunyan & Chip-A-Saw chainsaws, pictures saved from ebay. David 1 pmackellow reacted to this Share this post Link to post Share on other sites
factory 487 #7 Posted January 17, 2017 See this thread for some pictures of the other Chip-A-Saw. David 1 pmackellow reacted to this Share this post Link to post Share on other sites
Wallfish 698 #8 Posted January 17, 2017 15 hours ago, pmackellow said: Any photos please ? This was a thread on mine. Still never got around to painting it but it does look good without paint too. 1 pmackellow reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #9 Posted January 18, 2017 Thanks Gents Share this post Link to post Share on other sites
pmackellow 2,738 #10 Posted February 2, 2017 New arrival this afternoon, many thanks to David (factory) It's cleaned up really well, off to see John Cruse at the Mower Centre tomorrow for a chain 3 factory, Wallfish and S1g reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #11 Posted February 3, 2017 Chainsaw now at the Mower Centre waiting for a chain 3 the showman, nigel and S1g reacted to this Share this post Link to post Share on other sites
Webhead 95 #12 Posted February 4, 2017 Hey John (Wallfish), These guys across the pond are beginning to pass us up... 1 pmackellow reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #13 Posted February 4, 2017 7 hours ago, Webhead said: Hey John (Wallfish), These guys across the pond are beginning to pass us up... Where you lead, we follow... Share this post Link to post Share on other sites
the showman 4,074 #14 Posted February 4, 2017 17 hours ago, pmackellow said: Chainsaw now at the Mower Centre waiting for a chain Ive always got wood to saw up Paul if you want to try it out. 2 Alan and pmackellow reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #15 Posted February 5, 2017 23 hours ago, the showman said: Ive always got wood to saw up Paul if you want to try it out. Have you Chris, you kept that quiet Paintwork and decals are so good I won't be touching them, will be asking Titch nicely to replicate some of the Paul Bunyan decals just to finish it off . 1 the showman reacted to this Share this post Link to post Share on other sites
factory 487 #16 Posted February 5, 2017 Found a better picture of the Paul Bunyan decal, from the Chainsaw Collectors forum, thread linked below; http://www.chainsawcollectors.se/phpbb3/viewtopic.php?f=118&t=12848 Looks like some had this decal instead, another poor quality picture saved from ePay. Here are some pictures of a yellow Chip-A-Saw that sold recently. David 1 pmackellow reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #17 Posted February 5, 2017 Great, thanks David I can make use of them Share this post Link to post Share on other sites
Wallfish 698 #18 Posted February 5, 2017 On 2/3/2017 at 7:39 PM, Webhead said: Hey John (Wallfish), These guys across the pond are beginning to pass us up... Na, they're still catching up unless one of them has about 50. BUT, they sure do find some stuff and it's slim pick'n over there compared to here. ( SO, maybe on that curve these guys are closer than I think). One thing for sure, it's guys like this which keep the hobby of collecting these little items alive and well. 1 pmackellow reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #19 Posted February 5, 2017 46 minutes ago, Wallfish said: Na, they're still catching up unless one of them has about 50. BUT, they sure do find some stuff and it's slim pick'n over there compared to here. ( SO, maybe on that curve these guys are closer than I think). One thing for sure, it's guys like this which keep the hobby of collecting these little items alive and well. 12 at the last count It's you guys that have inspired me to collect these little machines (as well as everything else I collect ! ), and for that I thank you. Share this post Link to post Share on other sites
pmackellow 2,738 #20 Posted February 18, 2017 Chainsaw collected today from the Mower Centre, many thanks to John Cruse for the new chain Just need some decals now... 2 factory and Wallfish reacted to this Share this post Link to post Share on other sites
factory 487 #21 Posted February 19, 2017 On 2/4/2017 at 0:39 AM, Webhead said: Hey John (Wallfish), These guys across the pond are beginning to pass us up... On 2/5/2017 at 8:37 PM, Wallfish said: Na, they're still catching up unless one of them has about 50. BUT, they sure do find some stuff and it's slim pick'n over there compared to here. ( SO, maybe on that curve these guys are closer than I think). One thing for sure, it's guys like this which keep the hobby of collecting these little items alive and well. Just done a quick count and I have 29 different tools (a few more if you count different versions of the same tool) in my collection, 13 of which have been found over here. There is also quite a lot of engines here too, as well as a few duplicate tools. Definitely still catching up though. David 1 pmackellow reacted to this Share this post Link to post Share on other sites
Wallfish 698 #22 Posted February 20, 2017 6 hours ago, factory said: Just done a quick count and I have 29 different tools (a few more if you count different versions of the same tool) in my collection, 13 of which have been found over here. There is also quite a lot of engines here too, as well as a few duplicate tools. Definitely still catching up though. Not really, you ARE caught up. Think I have around 35 different tools, the rest are different versions and duplicates. Looks like I'm going to have to pull them all out and count. Share this post Link to post Share on other sites
pmackellow 2,738 #23 Posted February 20, 2017 I'm still the newbie with a dozen or so then! Share this post Link to post Share on other sites
Wallfish 698 #24 Posted February 20, 2017 4 hours ago, pmackellow said: I'm still the newbie with a dozen or so then! Share this post Link to post Share on other sites
pmackellow 2,738 #25 Posted February 20, 2017 28 minutes ago, Wallfish said: Share this post Link to post Share on other sites
