Ian 2,417 #26 Posted May 18, 2014 Yes you have mate Share this post Link to post Share on other sites
Stormin 4,458 #27 Posted May 18, 2014 Just sold my ZYTO. I want something a little bigger. Share this post Link to post Share on other sites
Anglo Traction 1,016 #28 Posted May 18, 2014 Just sold my ZYTO. I want something a little bigger. That's a pity, nice project that one. Suppose you've been seduced by S1g's opening Post pic. Have you decided what you want yet? Share this post Link to post Share on other sites
Stormin 4,458 #29 Posted May 19, 2014 . Have you decided what you want yet? Depends what turns up, Richard. And funds. Nothing to big though. Bought the Zyto on impulse, as you do, then some bigger ones showed up. Be more patient this time. Nothing like the size of S1g's though. Not the room. Share this post Link to post Share on other sites
Martin77 4 #30 Posted May 29, 2014 Hiding behind the Ladybird mower and amonst the usual workshop detritus is my lathe... and to be honest, I've no idea who made it or when! It's obviously been repainted and renovated by the previous owner, whom I think made the motor frame, on-off switch and fitted the guards over the slow speed gears. It's a bit worn in places as expected, but gets used alot and is much appreciated (even if it is a bit grubby at the moment). The only mark on the main casting is the 'D.R.G.M.' number, which I think is a german trademark or something? The motor has '2 69' stamped on, which I presume is 1969...? It was mentioned by someone that it could be WW2 era, and brought back from germany after the war, though I have no idea if thats true or not. So if anyone can shed more light on it's history I'd love to know! 1 nigel reacted to this Share this post Link to post Share on other sites
Anglo Traction 1,016 #31 Posted May 30, 2014 Nice proper old Machine you have there Martin. D.R.G.M. - stands for Deutsches Reich Gebrauches Muster and yes It's pre WW2 German. The Motor was replaced/fitted in the 60s (after 1962) Here's a link to some information for you- http://www.lathes.co.uk/glass/ Share this post Link to post Share on other sites
Martin77 4 #32 Posted May 30, 2014 I have been told by someone who knows these things, that it's an Ehrlich (http://www.lathes.co.uk/ehrlich) dating from circa 1910 to the mid 20's, probably imported by a fella called George Adams (http://www.lathes.co.uk/george-adams) Never thought it was quite that old, so it's a nice suprise. Share this post Link to post Share on other sites
Stormin 4,458 #33 Posted May 30, 2014 At that age no wonder it's a bit worn in places. I know the feeling. Share this post Link to post Share on other sites
Charioux 16 #34 Posted June 9, 2014 I have one of those chinese cheap machines and I ignore the brand NOt very good but enough for a halfaninch precision mecanic!!!!! Share this post Link to post Share on other sites
Stormin 4,458 #35 Posted August 30, 2014 This is arriving tomorrow. Atlas 10. 2 and 3 jaw chucks, face plate and a milling attachment. There's also some more bits and pieces. Not sure what till it arrives. These come with it as well. 2 diggerjames and Anglo Traction reacted to this Share this post Link to post Share on other sites
meadowfield 1,900 #36 Posted August 31, 2014 Looks a handy lathe Norm. Share this post Link to post Share on other sites
Stormin 4,458 #37 Posted August 31, 2014 Errr! I mean 3 and 4 jaw chucks. It is now in place in the workshop. Pity I couldn't have the milling machine that was with it. 1 meadowfield reacted to this Share this post Link to post Share on other sites
meadowfield 1,900 #38 Posted August 31, 2014 Errr! I mean 3 and 4 jaw chucks. It is now in place in the workshop. Pity I couldn't have the milling machine that was with it. It was early Norm, I can make my 4 jaw a 2.. Share this post Link to post Share on other sites
Stormin 4,458 #39 Posted August 31, 2014 Just seen the time I posted that. Should have said today as well. 1 meadowfield reacted to this Share this post Link to post Share on other sites
slf-uk 914 #40 Posted September 1, 2014 I'm a bit late to the party on this one. I have a Colchester Master lathe and a Cincinnati mill. The fun bit was having them craned over the workshop roof. Iain Share this post Link to post Share on other sites
Stormin 4,458 #41 Posted September 1, 2014 When I was serving my time, we had a couple of Cincinnaties like that. Good machines. Share this post Link to post Share on other sites
Anglo Traction 1,016 #42 Posted September 4, 2014 This is arriving tomorrow. Atlas 10. 2 and 3 jaw chucks, face plate and a milling attachment. There's also some more bits and pieces. Not sure what till it arrives. That's a Good'un Norm, nice find. No stopping you now. I'm a bit late to the party on this one. I have a Colchester Master lathe and a Cincinnati mill. The fun bit was having them craned over the workshop roof. Iain Very nice gear there Iain .Craned in over the roof eh!......not planning on moving anytime soon then? . Share this post Link to post Share on other sites
slf-uk 914 #43 Posted September 4, 2014 It helps to know someone who you trust who owns one of the best companies specialising in machinery transport and moving. His guys made it look so easy. It will need to be moved if I build a new workshop Iain Share this post Link to post Share on other sites
diggerjames 543 #44 Posted September 16, 2014 Hi all this my new lathe I've just acquired its a Harrison can't wait to get it installed 3 Ian, Anglo Traction and nigel reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #45 Posted September 17, 2014 Good lathes Harrisons. . Share this post Link to post Share on other sites
Ian 2,417 #46 Posted September 17, 2014 If only I had the floor space and strength in my shack for a lathe like that... Out of interest how wide on object can you fit on the chuck? Share this post Link to post Share on other sites
the showman 4,074 #47 Posted September 17, 2014 Blimmy James that's nice, wish you lived nearer !! Share this post Link to post Share on other sites
diggerjames 543 #48 Posted September 17, 2014 Not sure yet Ian I'll find out next week ! I can do mail order Turning if required if that helps ? Share this post Link to post Share on other sites
meadowfield 1,900 #49 Posted September 17, 2014 Looks a very good bit of kit, guessing it'll do at least 10" swing and has a 3ft bed.... Share this post Link to post Share on other sites
loggerhogger 4 #50 Posted September 19, 2014 My small lathe is a 12"X24" sears Atlas my larger one is a 1910 18" Greeves Klusman 4 Anglo Traction, C-101plowerpower, diggerjames and 1 other reacted to this Share this post Link to post Share on other sites
