Leaderboard
Popular Content
Showing content with the highest reputation on 09/17/2018 in Posts
-
4 points
The things you have to do.
Anglo Traction and 3 others reacted to Stormin for a post in a topic
Eldest grandson got married this weekend, so I had to do my grandad thing. Wedding venue and where we stayed. Ellingham Hall, Northumberland. Feeling out of my comfort zone. -
3 points
1971 Bolens Husky 1054
Stormin and 2 others reacted to slf-uk for a post in a topic
Joseph made a video of some of the work we did on this tractor. We still have work to do on the carb and governor -
2 points
The things you have to do.
HeadExam and one other reacted to Stormin for a post in a topic
I did manage one, Richard. A very nice Bombardier. That was followed by a few glasses of champagne. I think I had a several?? Jack Daniels as the day/night went on. I know my wallet was considerably lighter in the morning. No wonder at £4-75 a go. -
2 points
C-120 is going to another home soon
Cub Cadet and one other reacted to Anglo Traction for a post in a topic
Sorry Nigel, afraid it's going West to Dorset 😢. Had some theraputic time on the machines over the weekend. Made the Keys out of EN8 Steel which is a tad softer than the originals. shown here and the new machined blank- Milling the centre out (3/16"/ 4.75mm) to make the two keys- Finished Keys- The fit is now perfect in the Keyways and reassembly under way- -
2 points
The things you have to do.
Triumph66 and one other reacted to HeadExam for a post in a topic
No one recognizes me when I wear my suit either -
1 point
C-120 is going to another home soon
Cub Cadet reacted to Anglo Traction for a post in a topic
Having a clear out of the workshop and this is the first of the machines to go. In the process of installing a later Transmission. Why ?, well the old original one (5091 version) developed a tiny weep on the r/h axle seal and we all know they don't cure themselves. I suspected a worn needle bearing, so I checked it for up and down sloppy movement, as I won't sell it like that - Barely 0.007" up and down total with all the weight taken on the Jack, which is not that bad. I'm not happy just replacing the seal, so I'm going to rebuild this one and install the 103916 unit which is unmolested, clean shafts 'n' keyways, no leaks and had clean oil drained out of it- It will be used for mowing and towing duties, so it will have a heavy duty WH tow hitch fitted. Old tranny is on the left, replacement should be fitted this evening and I'll make the new woodruff keys over the weekend hopefully (in between watching Singapore GP)- -
1 point
1971 Bolens Husky 1054
Anglo Traction reacted to slf-uk for a post in a topic
It must have been over a year since I have managed to find some tractor time and we currently do not have anything running. Instead of doing the sensible thing of looking at something that ran recently we decided to drag a tractor out of storage that last ran well over 10 years ago. It was such a long time ago I cant remember what was wrong with it and it is no good asking Joseph because he was not born then. I really like this tractor because it is very original and has a hydraulic implement lift. Joseph made an introduction video of the tractor So far we have flushed the fuel tank, rebuilt the carb and fitted replacement throttle and carb cables, before we ran out of time. Hopefully I can make some time to continue with it. Iain -
1 point
The things you have to do.
HeadExam reacted to Anglo Traction for a post in a topic
We all have to endure that experience Norm and we all enjoy it as much as you appear to in the Pic. The important thing was were you able to have a few beers?. Reminds me of Wesley Pegden's reluctance to wear a suit and it kept making him turn left . Hope you had a good day. -
1 point
Fichtel & Sachs AG STAMO 202
C-101plowerpower reacted to Anglo Traction for a post in a topic
I was relying on you Koen to have seen one. Not sure how common they are, only seen one on Ebay.De in the last year. Very robust mower if well maintained. Impressed with the Wire pullstart cord, would outlast the engine. When I look at the Drive unit on the Mower, it reminds me of the WW1 Mk1 Tank Tails used for steering. I think they must have changed the colour scheme at some point, as this Sabo owned image is earlier than 1965 I believe- -
1 pointBlimey you scrub up well Norm , best underwear as well ? 😂
-
1 point
The Border Reiver MK 2
Anglo Traction reacted to callander ploo-man for a post in a topic
The Border Reiver is now Completed with new decals from Machinery Decals ( Titch ) Restorations Final Touch The story of the Border Reiver as now come to close -
1 pointReally nice work. The filing work is a zen exercise, while your doing it you try to tune the mind and body into harmony
-
1 pointHad a good day in the workshop today. Got the swivels finished. Turned down to fit through the arm and drilled and tapped for securing bolts. Forgot to take a photo. Spent sometime thinking how and where to mount them. Eventually decided where on the arm and then rigged up a temporary mount for the top one. Couple of nuts with the corners turned off to clear the arm. They will be pinned. I can set the depth down to 8-1/2 inch. Plenty deep enough and I very much doubt I'll plough that deep.
-
1 pointObtained some threaded bar yesterday from the farm workshop. So this morning I made the adjuster. A piece of round bar with one end drilled and tapped 22mm x 25mm deep. The other end drilled to suit some 3/8 black bar bent to form a handle. The threaded bar was then screwed in and secured with a dowel. I then started on a couple of swivels for the adjusting screw to pass through. One with clearance hole and one tapped out 12mm. Couple of pieces of 1" dia. offcuts out of the scrap box would do the job. Problem was how to drill through the bar. My bench drill won't take sleeve drills. Then I had an idea. Faced off the ends, then put a small centre pop where I wanted to drill. Next fitted the four jaw chuck in the lathe and using a centre in the tail stock, aligned the pop mark with that. The first piece was drilled and tapped. The thread started in the lathe and finished in the vice. Bingo! More lathe work to be done another day.
-
1 pointThe rear castor's plastic rollers were starting to show their age. So I decided to make two new ones. A nice piece of oak was cadged of a joiner friend and rollers turned up in the lathe. I think they should last a while.