Leaderboard

after looking at the side of the Perfect drill it was made at the Central Metal Works Bristol and now some pics of my Douglas Hoe and Gapper with some pics from Masham Steam Rally. I also acquired a Planet Junior No 25 seed drill

Got a little job down at a local garden centre. New owners have bought it and opened a tearoom/café. The grounds where plants etc were grow/displayed is rather overgrown. Did a deal with the owner. Cut down an overgrown area for a load of firewood. This morning set too with the C-81 and finger/sickle bar. Most of the tall growth is/was fruit tree saplings. Seemed a shame to cut them down, but the new owners want the grounds cleared up then they can decide what to do. Lost a couple of bolts that hold finger bar to gearbox so had to call it a day. Loaded tractor onto trailer then 42 bags of cut firewood. Replaced the missing bolts tonight and all is ready for the morning. I'll check bolts periodically from now one. The finger bar don't half vibrate even at low speed.

I did find a watering can and a some more sleepers, Chris. I'll pass on John's, Alan. God knows what I'd hit.

The original sprocket and part of the tubular shaft, both too large in diameter, were cut from the clutch housing. This was extended with a correct length and diameter replacement which was a VERY tight push in fit. For push in I should say helped with a hammer. This was drilled for a roll pin as was the replacement sprocket. Although the other end looked like it would never move this was also drilled and pinned while I was at it. The gearbox sprocket was not in line with it's big brother on the axle. It needed to be moved inwards about 1/4". A slice was carefully cut off with a thin cutting disc in my Dremel, held as steady as possible as these discs break almost by looking at them. I got almost all the way through before the disc mounting shaft bottomed out. The last bit was done from the opposite side. No photo's of this operation but before and after shots with the sprocket back on the gearbox. The section cut off, first photo, now moved to the outside.

Got a surprise this morning. Five days ago I asked Titch for some graphics for the trailer. This morning they arrived. I wasn't expecting them till sometime next week. Very pleased with them and pleased with the excellent service. Top marks Titch.