Ian 2,417 #51 Posted December 5, 2014 thats ian doing the tea supping, ime doing the photos, havent a clue who the other old fellow is, i seem to have inherited him yes mark go back in the post and you will see what the problem was Nothing to do with me... I was supping coffee i dont know which is uglier this tractor or ian At least my headlamp trim didn't need respraying 1 nigel reacted to this Share this post Link to post Share on other sites
TITCH 84 #52 Posted December 8, 2014 You never cease to amaze me Nigel!! I'm coming down there next year and see how good this tea is!! Titch 1 nigel reacted to this Share this post Link to post Share on other sites
nigel 1,876 #53 Posted December 8, 2014 You never cease to amaze me Nigel!! I'm coming down there next year and see how good this tea is!! Titch theres always a bed down here for you titch Share this post Link to post Share on other sites
nigel 1,876 #55 Posted December 10, 2014 finished 2 ranger and Triumph66 reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #56 Posted December 10, 2014 Very nice. Well done. Just leave it outside my yard gate. 2 nigel and Triumph66 reacted to this Share this post Link to post Share on other sites
Triumph66 1,256 #57 Posted December 10, 2014 Nigel, just one word... superb! 1 nigel reacted to this Share this post Link to post Share on other sites
meadowfield 1,900 #58 Posted December 11, 2014 very smart indeed 1 nigel reacted to this Share this post Link to post Share on other sites
Wristpin 400 #59 Posted December 11, 2014 "If anyone has any ideas on the 3 point hydraulics it would be good to hear.. As Nigel mentioned above the lifting arm are stuck in the up position. You can move them a very little up and down but you can hear a "metal clonking" sort of sound.. A stuck valve somewhere perhaps?" We had the same problem with a similar Kubota belonging to a National Trust property (possibly not far from you!) some years ago. Had it in for service, did all we should have and returned it in full working order only to receive a call that the lift arms were stuck in the up position. Hauled it back in and took the top off the back end, found nothing, refitted the top and it worked! G Share this post Link to post Share on other sites
nigel 1,876 #60 Posted December 11, 2014 "If anyone has any ideas on the 3 point hydraulics it would be good to hear.. As Nigel mentioned above the lifting arm are stuck in the up position. You can move them a very little up and down but you can hear a "metal clonking" sort of sound.. A stuck valve somewhere perhaps?" We had the same problem with a similar Kubota belonging to a National Trust property (possibly not far from you!) some years ago. Had it in for service, did all we should have and returned it in full working order only to receive a call that the lift arms were stuck in the up position. Hauled it back in and took the top off the back end, found nothing, refitted the top and it worked! G angus if you go back over the post you will see we resolved the problem and theres picts to Share this post Link to post Share on other sites
Wristpin 400 #61 Posted December 11, 2014 angus if you go back over the post you will see we resolved the problem and theres picts to Whoops, missed it ! May be "ours" had the same issue and we freed it off without realising what we'd done. Doubt if I will ever see one again but it's one for the "knowledge bank". Thanks. 1 nigel reacted to this Share this post Link to post Share on other sites
diggerjames 543 #62 Posted December 12, 2014 Looks great Nigel superb job 1 nigel reacted to this Share this post Link to post Share on other sites
rotoscytheben 94 #63 Posted December 13, 2014 nice work nigel as always, ive got my eye on one of these which a customer of ours owns ive asked for first refusal should she ever let it go one can only hope Share this post Link to post Share on other sites
