S1g 579 #76 Posted August 7, 2016 There's an old version of one of those trailers in our yard, problem is it's so heavy that you are restricted these days what you can actually put on it and still stay legal. Very handy for loading though. Share this post Link to post Share on other sites
wurzel 117 #77 Posted August 7, 2016 mount a caravan jockey wheel in front of the auger Share this post Link to post Share on other sites
Rocboni 257 #78 Posted August 7, 2016 Put rear conveyor on to weld lugs back on, total length 20ft and I can stand under the rear roller and I'm over 6ft 2 Stormin and Anglo Traction reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #79 Posted August 7, 2016 Rather than add plates to tilt the auger, is it possible to rig up a way to raise and lower the auger? 1 Rocboni reacted to this Share this post Link to post Share on other sites
Rocboni 257 #80 Posted August 7, 2016 No as it would hit the drive roller (yellow bit) the only thing I can do is to tilt it but it adds to the length. This thing is pulled out but usually those to holes line up underneath the yellow bit Share this post Link to post Share on other sites
Chris 642 #81 Posted August 7, 2016 You need a heavy weight on the tip of the conveor. That way it will pull a wheelie & you can get it up ramps 1 Rocboni reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #82 Posted August 7, 2016 See it's on that site, Rhys. Hoping to sell it before your mother gets home. Share this post Link to post Share on other sites
Rocboni 257 #84 Posted August 8, 2016 Don't have the space to keep it. Share this post Link to post Share on other sites
Stormin 4,458 #85 Posted August 8, 2016 We know a man who does. Share this post Link to post Share on other sites
Chris 642 #86 Posted August 8, 2016 I know a man down South who would also be very interested. You know who he is Rhys . Not me! Share this post Link to post Share on other sites
Rocboni 257 #87 Posted August 9, 2016 8 hours ago, Chris said: I know a man down South who would also be very interested. You know who he is Rhys . Not me! Ive been talking to him Share this post Link to post Share on other sites
Stormin 4,458 #88 Posted August 9, 2016 Wherever it goes, Rhys, you've had the pleasure of bringing it back to life. Well done. 1 Rocboni reacted to this Share this post Link to post Share on other sites
Rocboni 257 #89 Posted August 10, 2016 Sold pending collection, I'm sure you can all guess who to. Share this post Link to post Share on other sites
Stormin 4,458 #90 Posted August 10, 2016 I'll hazard a wild guess. Not to far from me? Share this post Link to post Share on other sites
Chris 642 #91 Posted August 10, 2016 Well I have been told no road trip for us down south Its going to go to a good home 1 Rocboni reacted to this Share this post Link to post Share on other sites
Rocboni 257 #92 Posted August 10, 2016 30 minutes ago, Stormin said: I'll hazard a wild guess. Not to far from me? Not too far from you Norm, he might ask you to come and collect it with him in a few weeks Share this post Link to post Share on other sites
C-101plowerpower 548 #93 Posted August 10, 2016 1 minute ago, Rocboni said: Not too far from you Norm, he might ask you to come and collect it with him in a few weeks i've heard Norm is an expert when it comes to driving skimmers 1 Rocboni reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #94 Posted August 10, 2016 I thought it would be Jonathan. If he needs me, I'll be only to pleased to assist. Share this post Link to post Share on other sites
Chris 642 #95 Posted August 10, 2016 At least Jon has got a pukka seat Share this post Link to post Share on other sites
Rocboni 257 #96 Posted September 17, 2016 Well, today Jonathan came for the skimmer, I also sold him my Mg40 due to it just being in storage. Loading the skimmer went smoothly much to my relief, I was worried that we couldn't get it on, but I lifted the front and jammed a peice of wood between machine and auger which gave it some ground clearance. No pictures as I was driving, I'm sure Jonathan will have one or two. Share this post Link to post Share on other sites
Stormin 4,458 #97 Posted September 17, 2016 Nearly called in at Jonthans this morning. Just as well i didn't. Pleased you got it loaded OK. Share this post Link to post Share on other sites
Rocboni 257 #98 Posted September 17, 2016 You'll have to call in to give him a hand to unload it all! Share this post Link to post Share on other sites
expeatfarmer 591 #99 Posted September 19, 2016 Travelled home from Jedburgh loaded with skimmer and MG40 sachs, Not sure what weight I had on board but towed well. Crawler garage nearly finished but not quite so will have to have another shift around to store them away. 3 nigel, Stormin and Alan reacted to this Share this post Link to post Share on other sites
Rocboni 257 #100 Posted September 19, 2016 More pictures which dad took. Jonathan pushing the crawler up the ramp😀 3 Alan, nigel and Stormin reacted to this Share this post Link to post Share on other sites
