the showman 4,074 #1 Posted September 6, 2018 I've got a Wheelhorse rear bracket to attach a dozer blade or tiller to the tractor but need another one but they are hard to find so I thought I'd make a copy. Start with a bit of quarter plate bent to shape, make a template from cardboard and drill some holes and a few square ones. I was lucky to have an old mount from a 265 to nick a couple of bits from Just needs a coat of paint when I get time 6 Alan, Stormin, pmackellow and 3 others reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #2 Posted September 7, 2018 Nice work! I made one for the C-125 some years back. Slightly different in that the cross bar is 3/4 angle and the levers I had to make. No bracket for a spring though. How many do you think we could produce when I'm down next year? Share this post Link to post Share on other sites
the showman 4,074 #3 Posted September 7, 2018 All done, I'm pleased with that. 7 Alan, Triumph66, slf-uk and 4 others reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #4 Posted September 7, 2018 If Pam see's those photo's you could be in for some earache. Share this post Link to post Share on other sites
HeadExam 1,783 #5 Posted September 7, 2018 Very, very nice work. Hats off to you. Share this post Link to post Share on other sites
Rayp 46 #6 Posted September 8, 2018 Another good job, but how did you drill those square holes? Share this post Link to post Share on other sites
Stormin 4,458 #7 Posted September 8, 2018 He'll have used the square hole drill he got for Christmas. Share this post Link to post Share on other sites
meadowfield 1,900 #8 Posted September 9, 2018 13 hours ago, Stormin said: He'll have used the square hole drill he got for Christmas. https://youtu.be/rjckF0-VeGI they do exist, I've got a set that do holes in wood Share this post Link to post Share on other sites
Cub Cadet 613 #9 Posted September 12, 2018 Superb! looks like my copy, must've made about 5 now. The square holes are not fun to file! 4 slf-uk, HeadExam, Alan and 1 other reacted to this Share this post Link to post Share on other sites
slf-uk 914 #10 Posted September 15, 2018 Fantastic work Chris, it looks like factory item Share this post Link to post Share on other sites
HeadExam 1,783 #11 Posted September 16, 2018 On 9/12/2018 at 8:13 AM, Cub Cadet said: Superb! looks like my copy, must've made about 5 now. The square holes are not fun to file! Really nice work. The filing work is a zen exercise, while your doing it you try to tune the mind and body into harmony 1 Cub Cadet reacted to this Share this post Link to post Share on other sites
quickrack 0 #12 Posted October 6, 2018 Help the uninitiated and take a photo of what it mounts on and what you attach with it please. Neat bit of fab though. I don't know if it helps but for a square hole, I drill each corner with a small bit, off set for half the thickness of the bit, before drilling out the middle. Cuts the filing back a bit. Share this post Link to post Share on other sites
