meadowfield 1,900 #151 Posted September 30, 2014 well done mark i love it want to see it with its bonnet on It did have a bonnet at newby Bonnet is in the e-tank at the moment... Share this post Link to post Share on other sites
the showman 4,074 #152 Posted September 30, 2014 Looking good Mark, its going to be tough at Newby next year, gonna have to come up with a plan Share this post Link to post Share on other sites
meadowfield 1,900 #153 Posted October 3, 2014 Looking good Mark, its going to be tough at Newby next year, gonna have to come up with a plan thanks no pressure then..... short update, fixed the clutch and it wouldn't start. I unscrewed the spark plug and saw this looked in the plug hole and it's totally coked up! cleaned plug, poured fuel into the bore and it started briefly. So next I cleaned the carb - inside and out it's a Walbro one, in reasonable nick. Not very dirty, but did have water in. result is it starts again, next job make it start on the key 1 Vinnetrow reacted to this Share this post Link to post Share on other sites
meadowfield 1,900 #154 Posted October 5, 2014 Not a huge amount to show... Footplates are mounted Seat base almost there And clutch finished This pic also maybe gives a little more away.... Share this post Link to post Share on other sites
Stormin 4,458 #155 Posted October 5, 2014 Coming on Mark. BTW. Where did you get the domed Allan screws? Share this post Link to post Share on other sites
meadowfield 1,900 #156 Posted October 5, 2014 Coming on Mark. BTW. Where did you get the domed Allan screws? Screwfix's finest, all my metric stuff is stainless and from there. It's cheaper than bzp ! Share this post Link to post Share on other sites
nathanwhittaker 50 #157 Posted October 5, 2014 Screw fix here I come Share this post Link to post Share on other sites
Stormin 4,458 #158 Posted October 5, 2014 Thanks! Some came with the C-81. I like 'em. Share this post Link to post Share on other sites
meadowfield 1,900 #159 Posted October 5, 2014 You lot are slow tonight! Share this post Link to post Share on other sites
Stormin 4,458 #160 Posted October 5, 2014 Engine pulley's different and no tensioner. New belt? Share this post Link to post Share on other sites
meadowfield 1,900 #161 Posted October 5, 2014 here's the rest...not my hood - stole it from Ewan, also still 4x2 - I needed the tin work in place before I finished the idler and 4WD select/difflock and the obligatory video 6 nigel, Ian, rotoscytheben and 3 others reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #162 Posted October 5, 2014 Oh! And the pulleys held in place with a bolt into the key way. Share this post Link to post Share on other sites
nathanwhittaker 50 #163 Posted October 5, 2014 I noticed that too norm Share this post Link to post Share on other sites
the showman 4,074 #164 Posted October 5, 2014 Looks like you need some more lug nuts Mark 1 meadowfield reacted to this Share this post Link to post Share on other sites
meadowfield 1,900 #165 Posted October 5, 2014 Looks like you need some more lug nuts Mark I've a box of them waiting to zinc plate - one of the next jobs on the list Oh! And the pulleys held in place with a bolt into the key way. picky! thats all I really recovered from my ZTR after the fire - a pulley and key from the old briggs 12hp Share this post Link to post Share on other sites
nathanwhittaker 50 #166 Posted October 5, 2014 Looks great mark Share this post Link to post Share on other sites
diggerjames 543 #167 Posted October 6, 2014 Brilliant Mark Share this post Link to post Share on other sites
nigel 1,876 #168 Posted October 6, 2014 love it mark, and its a good looking machine Share this post Link to post Share on other sites
norlett 32 #169 Posted October 7, 2014 Looking good.Mark.. Will try to look at it this weekend. Notice the seat looks better than the RSJ type you had on it. Share this post Link to post Share on other sites
rotoscytheben 94 #170 Posted October 7, 2014 looks great mark well done Share this post Link to post Share on other sites
Robins 55 #171 Posted October 8, 2014 Awesome! simply awesome what more can i say Share this post Link to post Share on other sites
Ian 2,417 #172 Posted October 8, 2014 Fantastic work mate, she looks to handle big stones just fine Share this post Link to post Share on other sites
pmackellow 2,738 #173 Posted October 8, 2014 Top job Mark Share this post Link to post Share on other sites
meadowfield 1,900 #174 Posted October 12, 2014 Thanks guys!!!! I'm pleased with the progress so far, I'm at the trying to squeeze the last bits in phase. The rear drive so the axle floats, as well as wiring! 1 diggerjames reacted to this Share this post Link to post Share on other sites
diggerjames 543 #175 Posted October 12, 2014 I'm sure you will succeed mark! Share this post Link to post Share on other sites
