Jump to content
the showman

Winter Project

Recommended Posts

3 hours ago, Triumph66 said:

Personally I think the Suburban fenders you have offered up,  will look a lot better with the Round Hood. Do you still have the cast iron seats to go with it?

They don’t have cast iron seats Andrew, they have pressed steel and I’ve got the odd one or six :rolleyes:.

I have found a pair and will use them.

EC78C513-41F4-4127-BD1A-17FE4FCE2E23.jpeg

D058E2F4-78AD-4C1B-85B3-58DC46C56309.jpeg

Share this post


Link to post
Share on other sites

Now I’ve got some skip tin I started making the side panels. I’ve made cardboard templates for the tool tray and the near side panel which is shorter than the original.

I marked the tin and cut it with a jigsaw as snips weren’t strong enough, easy to bend with the brake press in the vice.

One made just gotta drill some holes.

927A709D-D98A-4ACE-B75B-AACE4605DBBA.jpeg

2AFF043F-E1C4-44E1-A2AE-B40A04F6112F.jpeg

EDCEF3ED-7F52-4293-BA1B-D75EF1C28E6D.jpeg

C7B1B4CB-100F-4623-B632-8444983B7141.jpeg

7296534B-CDCD-4999-A591-30D240F30141.jpeg

47A5B4AD-1EEB-4245-98F4-CEC30A497F5B.jpeg

Share this post


Link to post
Share on other sites
18 hours ago, Triumph66 said:

I do enjoy reading your posts Chris and especially seeing how you work out what you need to do at each stage. The template is a case in point. There's a lot to be said for the old school mechanic in these days of parts fitters.

Thanks for your kind words Andrew and encouragement. :thumbs:

Share this post


Link to post
Share on other sites

Here’s the photos of progress so far,

One tool tray needs welding and the slot for the seat spring but it’s all bent ready, the other thing I noticed the side panels need little tags welded on to secure the belt guard ( bugger ) lucky I hadn’t primered them. I’ve cut the old ones off  the old panel.  A job for tomorrow if  I get time.

353EA2B6-63A7-42D4-A5B7-CC9A46D98545.jpeg

732CA7E8-4816-4C1F-983F-2CD6F5E908E5.jpeg

4C3E8CB7-7D4B-499E-BC4B-26325D955FDD.jpeg

0A28E698-1C0B-493A-B45B-08EA6645AD73.jpeg

840183A3-8A15-4C33-A544-6E6D15F51697.jpeg

1AB6C5A8-0E8B-4789-8A85-204F0307006D.jpeg

Share this post


Link to post
Share on other sites

Not much progress this week as I’ve been busy with other stuff but here’s the latest.

Ive made the belt guard clips and welded them on, Ive made 2 supports for the deck lift thingy and cleaned a few more bits up.

Hopefully all the panels are finished and i can get them  fitted on both tractors.

60F66F96-C516-4429-9E91-3CC328684BAD.jpeg

34536B9B-08DF-4D84-8BC1-A6454E7D49E7.jpeg

FAAE23E9-F164-4BD7-8DE5-BCD5C45A39FA.jpeg

259CFFB0-3932-4A28-A788-319FBC91DFFF.jpeg

Share this post


Link to post
Share on other sites
3 minutes ago, Stormin said:

Looking good, Chris. :thumbs:

 

Are you going to trial fit everything, then disassemble and finish paint?

That's my idea, won't to make sure ive got all the parts and parts ive remade all fit, once its finished its easy to pull apart and paint it all.

Share this post


Link to post
Share on other sites

Got the new panels all fitted and bolted up tight today and the lift mechanism fitted. One cover I haven’t cleaned as it had a Mountfield ID plate on it from new and still has the shade of red i need to match.

I’m pleased with the look and the belt  guard fits as well.

93542667-9C04-4914-A3D4-39C0CEB165A1.jpeg

3FE3FF1C-2C33-40D7-9213-8D71234CA54E.jpeg

A30D724D-4AC1-4A97-8C86-9DC80278B3F4.jpeg

F761A913-771F-496A-B6BE-5E8B693AEFC6.jpeg

3354A4EA-421C-42A7-84B0-D75A95347E49.jpeg

Share this post


Link to post
Share on other sites

Bill and Ben get some stick, gearstick that is.

I did have two but can’t find one only a load of others all the wrong shape :( so out with the heat and re-bend one.

Now they are happy, both have a stick.

The one on the left is the original.

E6ED959D-1E9B-4BE8-8301-87F8556E03F2.jpeg

326E4FBD-2FBB-4C00-BD47-DF14566CB852.jpeg

8D06D50A-D051-4A31-9804-49CBF4E71102.jpeg

B1726CB7-C1B2-4D69-A626-1613376FCB2F.jpeg

Why do my photos load in the wrong order ? :angry:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...