Leaderboard

With no more steel to hand to make any more of the frame (an order was put in today), I turned my thought to narrowing the rear axle.. Time to get serious and work out how narrow it needs to go. So the chassis was welded to some bit's of box at the right height... This is the rear.. Did I mention I like MIG welding? And once I was sure the chassis was central on the bench (I had drawn a big rectangle around the bench with a line right through the center), the bit's of box were firmly screwed down.. The chassis isn't going anywhere now So out came the wheels, bit's of bodywork and the odd bit of wood for some mocking up.. Moving the rear wheel in and out, backward and forwards until I hit the "Grin spot".! The "Grin spot" is when you know you have got it just right and a big grin breaks out on ones face quite often followed by some silly giggling Once I'd had a coffee and calmed down a bit, out came the tripe measure followed by some scribbling and head scratching.. The standard width Reliant axle is 1288mm hub to hub.. I need one that's 780mm in width.. So I need to narrow it by 508mm or 254mm each side, or the bit between the masking tape need to be cut out!! I won't be doing any cutting here though, Nigel has a powersaw thingy that's far more accurate than anything I have here.. So see you soon for some metal sawing Nigel Oh, for me one of the best views of Why Not is from the front.. The trouble is there is not enough space to get a camera in to take the shot.... So I tried the Panarama setting on my phones camera... Not quite the result I was after Thought I'd better add this as well... The latest Project "Why Not " video Thanks Mark

looks like my projects are on hold again---- stuck an axe in my right palm on Monday-- in Feb I cut my thumb off on the bench saw so its advice only I'm afraid Nathan!

Andrew, You also need a finger bar mower, flail mower, sleeve hitch, FEL and hydraulic lift. Give me a while and I will think of others :-) After last year we must have snow this year. Iain

Look like you and Denis had fun dismantling it mate.. I'm guessing oil everywhere judging by all the sawdust

looking good Ian

Yet more work on the engine frame thingy, top mounts this time.. I did tack a couple of the top mounts on complete with bit of the bike frame attached.. I didn't like the look of it so the mounts came back off, lost their bit's of bike frame and were welded back on.. They will have some more strength added. A bit of thick wall tube.. With a bung/spacer thingy welded in each end. It fit's here on top of the engine.. To make space to get a long bolt through I had to notch and weld a bit of tube into the frame each side. Part welded on to the frame.. The welds do look much better from the underside And a couple of rare shots of the engine frame without the engine

Great video. Thanks.

Santa Pod? That's north to you.

Great video , better late than never. Love the miniature tractors & Bedford lorry

Good video, love the portable engine driving the threshing drum !! What make was the pink tractor at the end of the video ??

not quite true the honda that holds the record had an engine from a snow jetski thingy but they cheated realy cos the rules say it has to cut grass so what they did was put some electric battery strimmers under it to get round the rules and ian every year up north some where on an old air field runway they let you go for speed records on two and four wheels

I bought some parts a while back from someone who does lawn mower racing and apparently if you use the chassis and a few other parts like the hood it is still classed as a lawn mower. A record attempt would be fantastic. Iain

Sorry to let her go but Widestride still needs finishing, its in good hands with Nathan.

Just watched your youtube video. Once again great video keep them coming.... You said 100MPH plus. Then i got to searching..., the speed record for a lawnmower is that little honda at 116.57MPH. Can you beat it!! Mind you where you going to be able to test it to get it too full speeds? Both your machine and the honda have motorbike engines in them so it's like they are in the same class, not as if ones got a motorbike engine and the others got a briggs and stratton, let's try break the record.. 120mph.

Its because I got him drunk on cider the other night lol

I've gone off Dibnah.

i had my first go this yearand realy enjoyed it , never did get a strait furrow and people laughed at my painted plough, i had a top ploughman next to me and his was very neat, but it took him all day to cover the area i did in an hour, i came home with a big smile on my face, where he went home very upset cos he didnt win

thats mate well done

ive seen it in the flesh today and am impressed

Brilliant, Ian.