Leaderboard
Popular Content
Showing content with the highest reputation on 12/19/2015 in Posts
-
4 points
Ransomes MG2 number 137
Alan and 3 others reacted to expeatfarmer for a post in a topic
Engine back in today, bolted gearbox top back on with new studs, fuel tank mounted with leather cushions as per spec. Can't fit drive wheels until I have completed pin-striping, waiting as long as I can to make sure paint is dried through. -
2 points
Project Horse Gut....Nigel and Ians joint project
HeadExam and one other reacted to nigel for a post in a topic
the best bit is today i returned the float and jet back and got £50 refund thats a right result cos it had been a special order from germany, so the main jet and bowl gaskit only owes us £36 which we can live with -
2 points
Rural Past Times Aug 8/9
Joe the small engine man and one other reacted to nigel for a post in a topic
always the second weekend of augaust andrew -
2 points
Ransomes MG2 number 137
nigel and one other reacted to expeatfarmer for a post in a topic
left off the photos -
1 pointThat's good news on the parts refund mate
-
1 point
Project Horse Gut....Nigel and Ians joint project
nigel reacted to the showman for a post in a topic
That's good news Ian, well done mate. Nice to get that out of the way before Christmas, you're be able to sleep now -
1 point
Project Horse Gut....Nigel and Ians joint project
nigel reacted to C-101plowerpower for a post in a topic
Its alive!! -
1 point
Project Horse Gut....Nigel and Ians joint project
nigel reacted to meadowfield for a post in a topic
Good news boys! -
1 pointWell done Ian. The simple things are always the worst.
-
1 point
Project Horse Gut....Nigel and Ians joint project
diggerjames reacted to Ian for a post in a topic
Nope Part of the problem as we found yesterday was the new float was too tall, which meant when the float went up it bottomed out on the carb body before shutting off the fuel! Once the old float and jet went back in the flooding stopped. One thing that was really bugging me was why the spark was so weak at the plug until the ignition was turned off when it produced a nice fat bright spark just the once! This got me thinking, so I did a little research.. And found an external condenser on a car engine is wired onto the positive side of the coil, where as small engines say a Kohler or a Mag the condenser is wired onto the negitive side of the coil... No prizes for guess which way we had it wired Soooo... armed with a condenser wired in the right way, and also the base jet settings for the Bing carb the engine was soon brought to life Of course all this happened before Nigel had turned up, so I carefully timed it that just as Nigel was pulling in I was driving Horse Gut out the workshop!! The look on Nigels face was priceless.. At first he thought I was driving the Cammo 8 without a bonnet, until he noticed I was driving past the Cammo 8 which did still have it's bonnet on! Picture a look of confused/think your seeing things/disbelief all rolled into one which after a minute gave way to a big grin You have indeed -
1 pointI can't help but grin everytime I look at Horse Gut.. She does look good When I got into the workshop this morning I found Nigel had left me a kinda message on the bonnet!... I can't decide if Nigel was just checking he had my name spelt right or it was just a hint that I should clean the paint off or not Close up you can see how thick the paint is, you can also see how bad Nigel's writing is Most of the front of the bonnet paint free.. It was nice to see the detail coming back that was hidden under many coats.. Trying the Horse Gut for size, not bad but the seat needs to be raised a couple of inches.. Until we dropped HG down almost ground level we had never noticed how skinny it looks around the middle! Also lower makes it look longer for some reason! So I had a play with some cardboard to see if some extra material of the chassis and fender pan would improve things.... It most certainly did The fender pan needs a few tweaks to give the front a bit more angle. As Nigel will have a very full workshop for the next week, HG found her way into my workshop.. HG is only 4 inches longer than the Cammo 8 which is up for sale by the way I almost forgot!!
-
1 pointThanks for that Angus, it's close. we did try to get some measurements from the seller but alas he has so far failed to come up with any! Thanks Koen, as you know we have a new main needle, float and float bowl gasket on the way so hopefully that will do the trick. A bit of a large update for you all.. With a bit of trimming the battery was made to fit in it's original postion. You can also see how the bit of WH bodywork under the dash surround is fitted.. Behind the bolts are a couple of captive nuts welded to a bracket which is welded to the chassis. No idea what this fuel tank is from, but it's a nice size.. As you will of noticed we had to cut part of the dash surround out to make the tank fit. Before you ask there will be some rubber going between the fuel tank and the battery terminals to stop and accidental shorting out from happening. The gap under the front of the dash surround needed sorting.. So a patch was cut to fit the gap.. Nigel cleaning up one of the front wheels. I think this plate came from a Wh 314 but I'm not 100% sure.. But it does make a nice heavy duty bracket for holding the fuel tank in place.. Tank and bracket upside down in this photo. I thought I'd have a play with the camera affects setting for this welding photo.. If it's not blue it's black and white We found that the welds that hold the steering column to the chassis had cracked, so as well as welding the cracks up we added a gusset to add some extra strength.. A view from the side.. From the front you can see the gusset has had a shaped plate plug welded to it.. So when the body under the dash bit slides on.. It's a perfect fit