CNew

Webhead, I may have an opportunity where I might need one of these. Are you interested in maybe selling one? If so, what would you be asking? Thanks! Clint

Wow, that’s too funny. Yep, I met Oakslayer/Keith today to pick it up. I need to look into it further to see what he meant with the “seal leaking” reference. As soon as I can get some fuel/oil mixed I’ll be able to run it longer and get a better sense for what issues it might have, if any. I haven’t tried the auger yet to see if it turns. It has a fair amount of chipped paint and stickers pealing off. I need to decide if I ant to fix it up or leave as-is and just get it running well. I’m curious, are there any common problems that the later O&R engines are known for or the ones after Advanced Engine Products bought them out? This one is a model 13B. Clint

Thought I would share my latest edition. Picked up this Strikemaster Icemaster today. Runs ok but need a thorough cleaning and tune up.

Webhead, Do you still have any of these carburetors? clint

Most of the regular fuel on my area is 10-15% ethanol. I did find one station that sells “non-oxy” which they advertise as for small engines and supposed to have less or no ethanol but they don’t give much details.

Thanks Webhead and Factory, I really appreciate your expertise and insight. I will give the Stihl oil a try. Do you think there is any value in getting the Stihl fuel premix (50:1) and adding additional oil to bring it to 32:1? Seems like the fuel they use would be better quality than service station gas that has high ethanol%. I dont know if Stihl also puts other additives in their premix that might be harmful to these older engine seals and other plastic or rubber parts. Thanks- Clint

Thanks David! The photos of the foam are helpful. I agree, the glowplug adapter is interesting. I’ve got it out now and will go with a normal spark plug. I may stop at the local hardware store again that sells Stihl and see if there is anyone there that might have some insight on the oil composition. Since Stihl doesn’t say anything on the official website I’m thinking it may be a hard fact to uncover. clint

Interesting, after a little researching it doesn’t appear Stihl sells the standard HP (red) oil here in the USA. All I’m seeing is their HP synthetic version. Is Amsoil a possible good alternative?

Thanks! It does appear that the air filter is pretty much disintegrated, not much left. What do you normally use to replace it, some new foam air filter from a modern engine cut down to size? I also just noticed that this engine has some sort of adapter where the spark plug threads into the head. I was able to unscrew it and remove it. It had a very small hole threaded into the center, could this have been for using a glow plug or something? With the plug out it actually looks like this engine may have never been run. Clint

The engine arrived this afternoon, earlier than expected. After a quick look over I’m starting Tom thing this engine has been used very little, if at all. It looks to be all there. The governed system is interesting. Wish I had a gas tank for it... here are some photos, enjoy. Clint

David, Thank you for all the advice on the oil/fuel. I’ve started reading through older threads you listed. Like you I think I’d like to make very small batches at a time. I have access to a local hardware store that carries Stihl brand chainsaws and they should have the 2-stroke oils that were mentioned. Most of the service station gasoline here has 10-15% ethanol so I plan to stay away from this stuff. I found one station that has what they call “non-oxy” fuel that is supposed to have much less or no thanks and is for use in small engines, boat engines, etc. and I use it my lawn equipment. But for the O&R I will stick to the recommendations here from the experts here. Do you do the 32:1 ratio with a modern 2-stroke oil? Clint

Also, regarding the fuel mixture - is there a consensus on if it’s best to use a TruFuel type product that is engineered without the high ethanol % content, etc. of common pump gasoline? I’ve found individual cans of high octane (92-93) at the hardware store that are free of ethanol and I was wondering if this might be a good route to go for mixing with the SAE 30 oil. Most of the 2-cycle weed-wacker and chainsaw premixed fuels around my area tend to be 50:1 ratio. I don’t plan to run this engine much, just occasional use to show it off kind of thing so I don’t mind spending a bit more to get a good quality fuel that will prolong life and integrity of the engine. One of these days I would like to find a Drillgen or a small outboard boat motor powered by one of these engines. The Tiny Tiger generators are pretty neat too but tend to be pretty pricey. I saw a post somewhere on here where someone has an entire shed filled with a collection of tools, very impressive and a beautiful collection!

Hello David, Thank you, I think I need to read that NIAE report a couple more times. Am I to understand that these earlier models may not be as well constructed and potentially prone to premature wear or failure? I appreciate your connecting me with Webhead and Wallfish as well. I will be in touch with Webhead shortly to pursue the diaphragms. I was also able to find a couple Champion UY6 plugs and have them on order. Thanks, Clint

Hello David, Thank you very much for the welcome and I really appreciate you sharing your expert advice. The engine I will be receiving does indeed look like yours. The serial number is 030521 so pretty close to yours if I’m making it out correctly. I’ll post some pics once it arrives. What is the best way to connect with Webhead or Wallfish to discuss the diaphragms? Thank you for the spark plug recommendation, I’ll start tracking that down as well. I’m looking forward to getting into this thing. I can tell I’m already hooked- there are so many cool applications of this engine! Thanks, Clint

Hello All, I’m brand new to the forum and also new to the older Ohlsson & Rice engines. I’ve been working on various small engines including Briggs model size from the 1930s-50s so I’m in new territory here. I understand through some researching that there are some experts here in the forum and I’m hoping to get some advice. I recently acquired my first Ohlsson & Rice engine, actually still waiting for delivery. It’s a basic Type 115 engine and doesn’t have a gas tank or anything else. It’s also got a carburetor that looks a bit different from most that I’ve seen during my initial research. The top of the carb is completely flat with no spring loaded button on top or other holes on top. I’m anticipating it will need to be completely disassembled and cleaned and the diaphragm replaced. First question is does anyone here still make a replacement diaphragm or know of a suitable mateial I could purchase to make my own? Second question is, what is the recommended spark plug for these engines? Mine is coming without one and of course no other documentation to reference. I look forward to your expert opinions and to learning from all of you that are much more knowledgeable on these cool old engines. I’ll try to post a couple photos after it arrives.