CNew

Wallfish, Thank you for all the suggestions. I’m definitely going to give these a try. The bushing idea is great, that should help take out a bit of the slop. I haven’t tried the vinegar approach for gas tank rust but certainly will give it a go. It’ll be fun trying to attach new fuel line to the pick-up filter and nipple inside. It’s just low enough in the tank to make it really trick to reach. Here are a couple more photos... I think the air cleaner is junk. The welding melted holes in it. The threading job on the inside of the carb throat is also pretty bad. I suspect with a fresh air cleaner and some minor clean up to smooth down the threads it might still work but certainly swapping out the whole carb would be nice.

David, Excellent, yes- those both look to be the same as mine. Glad it appears to be original (except the hack job on the air filter). How you come up with all these photos and info is amazing! I haven’t had a chance to tear into it yet but I did do a couple spot cleaning sections on it just to keep inspired as to what it could look like. It should clean up nicely and I was actually surprised at how nice the red grips popped! Clint

David, Thank you for all the great advice. After looking at it a bit more I’m actually getting more excited at doing the more in-depth overhaul/restoration on this one. It’ll be fun working through the entire unit and I’m sure I’ll learn a great deal along the way. I’ll definitely keep my eyes open for other augers, I pretty much look on a daily basis and will let you know if I spot one. Clint

I would have to agree. I worked on my first recoil job over the holidays and it was a bit tedious. I didn’t even have to change the spring. I think I have a little technique now so hopefully the next one will be a little easier. Its really too too bad a previous owner butchered the whole recoil system on this auger. Strange what some people do to try to fix things. I’ll add some pics once I tear into it more. Clint

Oh yes, definitely fixable. I just wasnt expecting this condition based on what I was able to see during the deal. It’s defintely a cool piece! Clint

I ended up learning a hard lesson on buying an item sight unseen and out of state. In my excitement to find another O&R auger I ended up working out a deal with a seller out of state. They only had a couple very bad photos for me to gauge condition and make my decision but I went ahead with the gamble. I just received it and unfortunately it’s a disappointment. I haven’t been able to spend any time with it yet to completely go through it but after 10 minutes with it I have uncovered a number of issues already: 1. No spark, I had expected this and wasn’t too worried about it. 2. Some previous owner butchered the recoil mechanism and rigged up some strange spacer system comprised of a bolt and nut through the little oil hole. The distance between the inside of the recoil housing was also affected so they added washers as spacers between the blower cowel. They also ground down the threaded shaft and flywheel nut as part of this butcher job. So that’s pretty disappointing. I haven’t spent enough time yet to see if there is any way improve this, not sure it can be truly fixed ithout completely replacing the recoil and crank shaft. 3. I don’t think the actual aguer is a match to the gear box. It has a ton of slop at the unition and the paint is slightly different color so I’m thinking the auger was replaced at some point along the way. 4. The air cleaner assembly was also cut and welded on poorly made threaded shaft. The welding created other big holes and distortions so the air cleaner assembly is pretty much trash. They also did a terrible job actually trying to thread the throat of the carburetor to accommodate the newly welded threaded end on the air cleaner assembly. 5. The gas tank needs a thorough cleaning and new guts. 6. Condition of the coil is unknown and it is a bit rusted. More to come as I dig into this project. I’m not sure yet just how far I will actually go with it in terms of fixing it up. It would be nice to at least see if I can get it to run but given all the other issues I might end up just hanging this one on the wall as a reminder to be extra careful in buying sight unseen. Probably paid a bit too much to learn this lesson...

very nice!

Webhead, Thank you, that’s good insight, at least I know they’re not way off on their asking price. The Circular saw would be really awesome! I can’t believe you have a NOS chainsaw and circular saw, very nice! Clint

David, That’s great, I actually have something similar in progress. I ordered some materials over the holidays and they just arrived. The pictures you provided do give me some additional good ideas on how to construct it. Thanks, this is really helpful! Clint

I’m slowly making some progress going through the TAS P7 engine. I spent some time on the gas tank today and need to get some new sealing washers, add a new fuel filter and replace all the fuel lines. I have a new spark plug on order and I have the spark plug wire prepped for repair. It will be my first attempt using a new type of shrink wrap tape since I can’t slide the normal shrink tubing over the large end with the plug connector. I also had some success finding a used, but in great condition, kill switch from a vintage Tanaka outboard motor that matches the broken one on the P7 so I’ll have to get that all wired up.

It’s incredible how much knowledge and information you have! I might make the drive out to check out the saw in person and give it a good looking over. I don’t know how quickly it might sell, I’m guessing a chainsaw collector will snatch it up. Maybe after I can see it up close then I can make a more informed decision. The pictures they have posted shows in pretty well.

Thanks David, greatly appreciate you checking my work! Now I just need to mount this engine securely and get some fuel to it.

David, This is great info. I have to say as amazing as it would be to have this saw I’m really struggling to justify the $400. I wouldn’t really be putting it to any hard use but those old plastic races make me a bit nervous, especially since I never see NOS parts for these come up. Clint

Thank you David. It looks complete but I haven’t seen it in person yet and can’t tell anything about engine condition. Owner is firm at $400.

David, The E3 plug has a US patent number on it but that’s it. It looks to have similar depth but I think I’m going’s to swap it out for the NGK or Champion plug. Thsnks, Clint

I made a gasket for the carb. Does the fuel line connection from the carb to the engine look correct? thanks!

What do you all think a fair price would be on a Comet chainsaw in good condition? I found one that looks to be a complete unit and in pretty nice shape but the price seems a bit high. I’m guessing these are pretty rare so maybe it’s not out of the the question but I thought I’d get some other opinions before I attempt to go any further on it. thanks, clint

Hello David, I just got your messages. Thank you very much for the links to the manuals, I’m anxious to check these out. The spark plug that is currently in the engine is a 14mm- I tried a standard Champion CJ14 and it fit fine. I’m not familiar with the brand, could be some off name cheapo. clint

Hell All, I just acquired an ice auger with a TAS P7 engine. I would be interested to know if anyone has found literature, parts lists or manuals. Also, does anyone have any suggestions or know the correct spark plug to use on these? Thanks, Clint

I just acquired an ice auger with a TAS P7 Engine. Does anyone know the correct spark plug for these? Thanks, Clint

Very nice, those are all definitely items of interest to me. Maybe we can discuss pricing and I’ll keep you posted if I can get my Boston trip planned.

Sent you a PM. Clint

I love the translation...