Jump to content

wurzel

Members
 View Profile  See their activity

  • Content Count

    146

  • Joined

  • Last visited

  • Days Won

    4
Posts posted by wurzel
 
 

  5. Posted

    1 hour ago, HeadExam said:

    nothing like good ramps and a wench. lol I used to ride them up, but with an implement and my 200 lbs, that's nearly half a tonne. most ramps aren't rated for that much weight. I walk along them while they SLOWLY inch up. Hydrostatic drives make it easiet.

    you cant beat a good wench lol

    HeadExam and meadowfield reacted to this

  8. Posted

    25 minutes ago, Anglo Traction said:

    Nice project you have acquired there!. Seen these before somewhere. I believe your  model is a YR60?. Is the Wisconsin 2 cylinder and hydrostatic drive?.

    Would like to get my hands on a 'Wiso' one day.   

    hi i have a very nice wisconsin tjd 18hp twin if you are intrested

     

    Anglo Traction reacted to this

  9. Posted

    hi if its an inertia starter the cog may be stuck on the starter shaft  spray the cog with wd40 and try tapping the starter with a hammer as you turn it over failing that pull the starter and see if you can free the  cog 

    harryt reacted to this

  12. Posted

    5 minutes ago, HeadExam said:

    You might think about opening a you tube account then your videos would play automatically and wouldn't have a 10-15 min download time. Nigel has a awesome one as do many others here, its not too hard.

    i have youtube but never uploadedthere

    HeadExam reacted to this

  14. Posted

    25 minutes ago, HeadExam said:

    I've had both models, and both drove the transmission off the flywheel side, while earlier tube frames and large frames powered the transmission off the PTO side. Not saying one is better, just different. I noticed you have the same issue I have, the current battery is too big for the plastic hold down.

    i prefer the Hydro much nicer to use and i like the sound of the kohler twin not sure if its the correct battery hold down

     

    HeadExam reacted to this

  16. Posted

    1 hour ago, HeadExam said:

    Actually the QT16 was a 16hp Onan Twin cylinder and the QS16 was the 16 hp Kohler single cylinder, the Q stood for Quiet model or Quiet line and the T and S stood for twin or single. The QT series and XL series Medium Frame tractors had the engine oriented 180 degrees differently than the earlier Bolens tractors.

    G16XL layout

    20160204_192240.jpg

    20160204_192250.jpg

    20160204_192352.jpg

    12697287_10208239187955028_8631345661167339865_o.jpg

    Triumph66 reacted to this

  17. Posted

    9 hours ago, HeadExam said:

    Excellent video, you ran out of driveway, come do some of mine, lol. Did you know they made that same tractor with a 16hp Kohler k341 single cylinder, the QS16?

    thanks yes was it  called a QT 16 though 

    ive got a G16XL as well with a tecumseh oh16 but that has a belt drive rear tranny but shaft drive from engine

    cheers nick

     

    HeadExam reacted to this

  21. Posted

    collected it today its missing a double pulley from the GRS and the GRS belt the guy i bought it off is going back to the warehouse he got it from to have a look .He said its full of engines boats and parts PO was a bit of a hoarder bought loads of new speedboats engines etc had them in an airconditioned warehouse had 6 containers of new stuff as well

    13 hours ago, Chris said:

    Thats as new Nick.

     

    We should start a section on here for whos got the cleanest machine

    my cleanest macine before i got this one

    20160813_151332.jpg

    20160813_151409.jpg

    20160813_151420.jpg

    Triumph66, Joseph, HeadExam and 1 other reacted to this
 
×
×
  • Create New...