Alan 1,273 #1 Posted June 27, 2015 After approximately 40 plus years of captivity, John's Fordson has made a hasty exit from the barn it called home. The front tire was inflated just before the move, but after a few minutes the air inside decided it wanted to escape, and made it's own way out through the tube and sidewall with a loud BANG. What a waste of air. Much to everyone's surprise, all the wheels rotated, the steering was free, and the move from barn to loading was done in about 25 minutes, via a combination of pulling and pushing. It took almost as long strapping it down on the trailer and checking for loose bits that might go awol on the way to it's new home. Thanks Philip and crew. A few photo's which could have been better. The sun is never in the right place. 9 Triumph66, slf-uk, Anglo Traction and 6 others reacted to this Share this post Link to post Share on other sites
the showman 4,074 #2 Posted June 27, 2015 That's amazing ! didn't think it would have come out that easy, I see you used a land rover would't the Bolens pull it 2 Triumph66 and slf-uk reacted to this Share this post Link to post Share on other sites
Chris 642 #3 Posted June 27, 2015 Well done, Glad to see a landrover involved 1 Triumph66 reacted to this Share this post Link to post Share on other sites
Alan 1,273 #4 Posted June 27, 2015 That's amazing ! didn't think it would have come out that easy, I see you used a land rover would't the Bolens pull it Didn't want to risk breaking it Chris. Not before you have a test drive anyway. Share this post Link to post Share on other sites
slf-uk 914 #5 Posted June 27, 2015 That's amazing ! didn't think it would have come out that easy, I see you used a land rover would't the Bolens pull it Engage diff lock and some weight on the back, easy for the Bolens. Share this post Link to post Share on other sites
Phyliss 41 #6 Posted June 27, 2015 I was going to bring my E1A Major up to do the shifting & loading but my brother in law, Terry, said he'd assist with his Landrover. . He towed it to it's new place as my van is limited to 2.8ton & i haven't the fogiest of the trailer weight let alone the tractor & winch. It looks safer behind a Landy. Philip 1 Triumph66 reacted to this Share this post Link to post Share on other sites
Chris 642 #7 Posted June 27, 2015 Better towing vehical Still be fun to put the 450 on my trailer Share this post Link to post Share on other sites
Phyliss 41 #8 Posted June 27, 2015 It's a shame the 450's got a shot tyre otherwise i'd just bar it behind my Major. I'll see what the Inter weighs; i wouldn't want to be the wrong side of the law, not by to much anyway . Heading back today we passed a female officer but she just gave us a smile. A late thanks to Alan for the photos Share this post Link to post Share on other sites
slf-uk 914 #9 Posted June 28, 2015 Philip, you did a great job moving the tractor and it looks so much better out in the light. Great pictures from Alan too. Iain Share this post Link to post Share on other sites
Phyliss 41 #10 Posted June 28, 2015 Philip, you did a great job moving the tractor and it looks so much better out in the light. Great pictures from Alan too. Iain Thanks Iain. With a bit of planning i hoped it would go ok. I popped up there last week with Terry to show him the ground & way out etc. We just hoped the wheels turned & that it steered. It certainly does look better in the daylight. With my other Standard we used the trailer winch & van winch together but to unload it the plugs were removed, reverse selected & we cranked it off the trailer. That was hard work. You to did a good job of packing those tractors into your van. Philip Share this post Link to post Share on other sites
Phyliss 41 #11 Posted June 28, 2015 (edited) I'll post a pic of the other standard when i can. Edited June 28, 2015 by Phyliss Share this post Link to post Share on other sites
Tom 215 #12 Posted June 28, 2015 Glad to hear you got it out OK, it looks so much better in daylight! Tom Share this post Link to post Share on other sites
Chris 642 #13 Posted June 28, 2015 It's a shame the 450's got a shot tyre otherwise i'd just bar it behind my Major. I'll see what the Inter weighs; i wouldn't want to be the wrong side of the law, not by to much anyway . Heading back today we passed a female officer but she just gave us a smile. A late thanks to Alan for the photos Google tells me 2700KGS. Thats petrol version. Yours is diesel Share this post Link to post Share on other sites
Phyliss 41 #14 Posted June 28, 2015 Google tells me 2700KGS. Thats petrol version. Yours is diesel Thanks Chris. I found a foreign website that mentioned the weight at 2750kg. Share this post Link to post Share on other sites
Phyliss 41 #15 Posted June 28, 2015 Here's our other Standard Fordson. The orange parts (excluding wheels) date from roughly 1939, the green parts 1942 & the engine from 1945. When we first picked it up it was all green but after a good wash the orange reappeared. At present the tank & carburettor are off but the new valves are in & compression is lethal. When the head was off i noticed the pistons were stamped 60 thou oversize. Once i get the manifold & carb back on i'll try & get it running with the water leaks & split block still to do. The wheels are Major ones, put on to make it mobile but I have the originals. Philip 5 pmackellow, Stormin, Triumph66 and 2 others reacted to this Share this post Link to post Share on other sites
Phyliss 41 #16 Posted June 29, 2015 Glad to hear you got it out OK, it looks so much better in daylight! Tom hi Tom. Yep got it back ok; apart from busting a ramp off the trailer whilst unloading. I didn't like them anyway & will look out for some removable ones or make some. It was being a bit of a monkey trying to push it round a corner due to the worm & wheel back end but we did it in the end. The tractor certainly does look better in daylight. I'm hoping it looks better still after a wash off. Share this post Link to post Share on other sites
Alan 1,273 #17 Posted June 29, 2015 hi Tom. Yep got it back ok; apart from busting a ramp off the trailer whilst unloading. I didn't like them anyway & will look out for some removable ones or make some. It was being a bit of a monkey trying to push it round a corner due to the worm & wheel back end but we did it in the end. The tractor certainly does look better in daylight. I'm hoping it looks better still after a wash off. Don't forget to dry it properly after washing. You don't want it to go rusty. 1 Phyliss reacted to this Share this post Link to post Share on other sites
Triumph66 1,256 #18 Posted July 1, 2015 Great photos Alan and a lovely tractor too gone to a good home. The landy is the best vehicle for towing in my opinion; the Bolens a very close second! 1 Phyliss reacted to this Share this post Link to post Share on other sites
Phyliss 41 #19 Posted July 4, 2015 It's had a bit of a wash today followed by a spray of diesel to 'enhance' the rust Todays push / pull vehicle was my Fordson Major, which being dated to 1954 makes it only 10 years newer than the N. Some where in between the two came the E27N Fordson (1945 to 1952). Unfortunately the O/S/F tyre didn't stay on the bead but did stay on the wheel. Re-positioning the bar got it moving in the right direction but did bend the bar. The bluey green isn't the correct colour for the N as it should be green throughout (excluding the wheels) but if i can get it running it may be left as is for a while. The offside wing was also loosened to allow it to pivot back round into its correct place. Now the drive chain & gears can be seen. Having left diesel in the bores to loosen the rings the next job is to fit new front tyres & tubes & possibly strip the carb' to stop it flooding. Philip 4 Triumph66, pmackellow, Anglo Traction and 1 other reacted to this Share this post Link to post Share on other sites
Alan 1,273 #20 Posted July 4, 2015 Like the GLOSSY rust finish Philip. Looks much better than the usual RUSTY rust. Share this post Link to post Share on other sites
Triumph66 1,256 #21 Posted July 4, 2015 Great patina on the bodywork. Good to see you are not wasting time working on it. Share this post Link to post Share on other sites
Will-Haggle 73 #22 Posted July 28, 2015 Could it be ex-RAF with that winch on there? Share this post Link to post Share on other sites
Phyliss 41 #23 Posted July 29, 2015 Could it be ex-RAF with that winch on there? I'm not sure. I'll have to do some research although i believe the RAF sometimes used the Industrial spec model N, some with lighting & drum brakes etc. This one may just be a winch tractor for tree work etc but with the date on the winch (if that's what it is) dated May 1944 & the tractor a similar age, give or take a month, it may have been with the RAF or similar. Share this post Link to post Share on other sites
