amcrules00

You got a nice hand full of tractor there.   

Courtesy of Webhead

Hi All
I didn't get round to putting the engine on its new trolley over the weekend but managed to get the gib keys out and remove the flywheels. That took most of Saturday, problem is it gets dark quick now or is it that it gets later earlier.
Here is some pics.
Paul

Yep...worked for me.    
                

Yep...worked for me.    
                

Yep...worked for me.    
                

A fellow member gave me the nod on this little engine on the bay, nobody bid on it and I won it for the starting price (£31).
As a few of my Wheelhorse's have this engine, I thought it would be a handy spare

My kids will play...
No.2 dug his C-121 out on leaf sweeping duties last week and sent me the pics when I was at work.

Had a bit of spare time this afternoon so I refilled the tranny up with oil after i found the bleed screw to let the oil in, fired her up and surprise surprise it works.
took a while to get going and purge the air out, but seems ok, well it goes backwards and forwards.
next job to put the wheels back on and test it outside. (makes my eyes water with it running it in the shed)   

Hello All,
 
Today I said good bye to my 4 wheeled cart, which freed up enough room in the shed to take my two lawn rangers from the patio and put them into a dry place ... well its not 100% water tight in there...    whilst out there I got all the tractors, engines, mowers and machines I have running, too keep everything moving and oiled up. Anything that was on the patio or out and about I've now put it all away and under cover in the shed for the winter... I know its early being only October but with college now by the time I get back home its dark and cant get out there and do anything,..
 
So with that, I decided to get the raider 10 set up and ready for winter duties I got some 12 mm thick rubber matting this summer knowing i would use it next time i got my snow plow out instead of the tyre we had to cut up last year I think it looks far better with this rubber skirt than the tyre..... Today I got the plow fitted onto the raider 10......here's to hoping....that's if we even get snow this winter...    here is some pics....

 
I forgot how much of a tight fit it was.....

 
 
Whats your guys set ups going to be this winter?
 

Wish I could help with the move...
can't wait to see the new digs Ian.      

Morning chap's cheers for all the great comments, much appreciated
 
Here's the 3rd vid for you all, In the arena day 2
 
Thank you Madeline (Ben's other half) for the camera work.
 

ians new shack
 

You got a nice hand full of tractor there.   

looks like something from a dragline excavator(the piece where a big steel cable was attached)?
 
 
Koen

You got a nice hand full of tractor there.   

Had a big move round today and got HypoHorse out of the shed into the sunshine, here's a few pickys

Coming on.    Just a thought. Did you think about a tipper body?

Hi all I had a little play the other day down at the shed I wanted to finish the exhaust system off or as near as , and carry on with rear body etc !

Went with a mate to Nothamptonshire today & picked up this beast. Mate brought it, I towed it home to Sussex
Needs some tlc, fitted with a 20hp flat twin engine & a monster 60in deck  c/w power steering!
Thought it was time to have a GREEN tractor on here  
Anybody got any info on it & a set of rear lift arms

So, with Ian's blessing...
I present to you a few of my "edits" you may, or may not have seen over on RedSquare, the international Wheelhorse forum.  

So, with Ian's blessing...
I present to you a few of my "edits" you may, or may not have seen over on RedSquare, the international Wheelhorse forum.  

So, with Ian's blessing...
I present to you a few of my "edits" you may, or may not have seen over on RedSquare, the international Wheelhorse forum.  

Will upload a video once the engine is back.

Missus wanted an island for the kitchen, so I made her one for Xmas.
It's 50% recycled too! top is made from the old garage roof timbers