Prices of CS engines has crashed lately, I recently sold one that I had spent quite some time getting running, it had the desirable electric flywheels and was an early engine, 1932, it only made £250 on Ebay. If there is original paint I leave it, you only have it once!
It doesn't matter if it's petrol or diesel. It's a stationary engine. Good job you've made of it. Your dad would be pleased.
You going to Newby Hall this year?
Only just read this comment. If I do go to Newby it will be as a spectator only, it's quite a long haul for me and quite costly fuel wise when towing the Lister.
Put your request in the Wanted Section of the forum.
Always good old to see something in use earning its keep.
I love to keep my old girls working, there's nothing better than seeing the perform the job for which they were intended. This is a picture of one my stationary engines, when she's at a rally she is usually powering lights, a kettle, many phone chargers for fellow exhibitors and the all important chip pan! This was Newby hall 2014.
While I was there I mentioned that I had noticed "a cell" of Wheelhorse collectors in the area! As far as I know there aren't as many over this way, although I do see one horse at the local rallies.
If anybody has a rear axle quick attach they don't use I would be interested as I could then mount the Rotavator onto my C series and have this blade on the Raider, that would make quite a handy tag team!
Yesterday I collected a front blade/snow plough and a lawn sweeper from a fellow forum member. This morning as it was very wet here I took the opportunity to have a go at fitting the blade, all went well other than a bit of head scratching when I realised the adjusting arm wouldn't fit as it was fouling on the brake pedal. After a short while I realised if I took off the rod guide eyelet and release lever and turned the entire arm so that the dog leg is facing inward (the opposite to how it was) it would fit perfectly, it does. One pin was missing for the lift but luckily I found one of the correct diameter in my box of bits, it just had to be cut to length and drilled for the R pin. Off I went and pushed up the rather large compost heap and was very pleased with the performance. I also assembled the lawn sweep and had a quick play, it works fine but the height adjustment kept jumping out, once again the box of bits was out, and stronger spring fitted and all is well. I also received on Friday my freshly fabricated Clevis hitch which my Uncle started to copy from his original about five years ago! He's made a nice job of it and after a few adjustments to my Mouldbord Plough I was running in some half respectable furrows, I'm even considering entering my local clubs Ploughing match later this year.
This post inspired me to take my camera to work with me today. Here is the C121 hauling a load of logs I'd just cut and the Raider rotovating a second pass on some pathways that needed reseeding:
I have had a quote to make up an original pattern Kohler exhaust but in stainless, but, the price dropped considerably (as you'd expect) when having a batch made up. I sadly don't have a wealth of cash to spend but wondered if anybody else has had a batch made and if any might be available? I'd also be interested in any new old stock that may be around for 10 & 12 BHP (the same size if I remember correctly).
Here is a picture of the two together, the Raider is nearest. I had seen the model list on your fine site but found the Raider again is noted as a B series????
I have visited your site, I just tried to enter some information to the register you have set up but was given this message "The result storage capacity has been reached for this form. Your result was not created. Please contact the form owner."
The numbers of my tractors are as follows:
Raider 10
Model 71-10K8
#160727
C121
Mountfield # 11122
Model 91-12K8 91
#169593
Let me know when the register is operational again and I'll add them there. Many thanks, Jamie.
I have asked this a few times in years passed and not got very far, I wonder if any dating system has since been unearthed for the Belgium built machines? If anybody has a way of putting a date to my Horses I would be very pleased and grateful.
So, I've noticed the forum has a Stationary engine section, although it's for Petrol engines I guess I can post about my Diesels?
Not so long ago I restored a Lister CS12/2 that my Dad had started before he left this world, I thought I should finish what he had started a decade or more before. Sadly as he had left it in a stripped down state and partially exposed to the elements it involved a very thorough every part to pieces restoration. Over 18 months I restored the engine plus and alternator for it to drive, the set up is in memory of Dad who loved engines and was extremely knowledgable on electrics. I designed and fabricated a semi portable base for it all to sit on and it has now attended several rallies and been the power source at a few family parties.
Here she is as Dad left her:
Here are some of the components nearing the end of the restoration, I recall this was just after I reassembled the injector pumps :
Out at her first rally at Newby hall where she ran 16 hours solid on he first proper run, I think we ran somewhere around 32 hours in total at that rally:
And a quick video somebody took at Newby, she normally has 2000 Watts of lighting running plus a kettle or chip pan as well as all the mobile phones people bring to me to charge!:
The grass I cut is often 12" and is quite a thick sward. I may get cussed for horse cruelty now but, one more than one occasion I've had dried grass catch fire in the cooling fins nearest the exhaust port but for this job is the reason "the Mongrel" was born. I wouldn't be as harsh on any of the other tractors and as those two tractors were destined for the scrap boat to China I don't feel too badly about the abuse.
Oh, and the reason I don't use a larger machine for this job is the limited access.
Many of you will have read my thread about the Raider I had stolen, I'm very pleased to say that yesterday she was returned to the site she disappeared from. Just last week I decided I would have to replace her as I do rely on her for many jobs through the year, not least to save me many hours mowing my allotment and other peoples grass. I ended up being offered a C121 at a price I could afford and made the decision to spend the money I had put aside for the reward I was offering on my missing tractor. Here is the Raider happily returned home alongside her new stable mate.
I first became fond of Wheel horses in 1995 when I took a pocket money job at a small country estate, there there was a C141 that the boss had purchased in 1978, the year of my birth. This in fact was the first vehicle I had driven and I soon learned to reverse a trailer with it too. I'm now in charge of estate maintenance at that estate and I still run the C141 pretty much every day, whatever is required of it it manages, from raking driveways to scarifying to aerating lawns to hauling mowers around the grounds on a trailer to hauling many tonnes of wood from the woodland to the yard. She is very well worked and the engine shows wear in the bore and notably where the governor spindle exits the crankcase, you can wobble this about like a knitting needle in a bucket! Over the years it has been suggested several times that she be replaced but I won't have it and if she ever has failed myself or my Dad (sadly no longer with us) will spend a little time in the shed rectifying the problem and off she goes to work again. A few years back after realising our modern Kubota didn't like cutting the long grass areas I used two scrap tractors I sourced to build one good one and this is now used solely for long grass cutting and sports a sixteen horse engine. Here are my two flanked by the ever trusty C141 and the 16BHP mongrel. The wood you see behind them plus many hundreds more tonnes have all been hauled here from the woodland by the little C141
I have now managed to save for a cash reward to anybody that can provide information that leads to the safe return of our beloved tractor, my Mum and Sister have also told me they will add to this reward. Please if you can help, do.
Wheelhorse rear discharge 42" mower
in For sale
Posted · Edited by adgecutler
Should be there as from 1900hrs, maybe you tried before that time?
Edit: Sorry it was 1930hrs.