Leaderboard
Popular Content
Showing content with the highest reputation on 07/05/2015 in all areas
-
2 points
The Ardingly Small Holders Show
Stormin and one other reacted to the showman for a post in a topic
First day at the show, here's a few photos -
2 points
Just Finished Another Old Engine (Pincor)
Ian and one other reacted to bowtiebutler956 for a post in a topic
Hello all. I just finished up another refurbish on an old engine. This engine is badged Pincor, but was manufactured by Briggs. These were used on Pincor reel mowers, and had a large 2 speed gear box mounted to the engine. While Pincor did make their own engine, its thought that later in production they used a few of these briggs engine. I got this engine a couple years ago, but it was damaged badly in shipping due to the previous owner doing a terrible job of packaging it, before sending it to me. It made me so mad, I put it on the shelf, and didn't touch it for the last couple years. The first couple pics below, are the pics of what I supposed to be getting, but trust me, thats not what it looked like when it got to me. The shroud was smashed, a corner of the head was broke, the oil bath filter was missing, and it was just generally beat up from bouncing around inside of a box for 1000 miles. I finally got over it, and gave it the attention it needed. I replaced the missing, or badly broken parts. I then spent some time doing body work on the sheet metal to get it straitened out. The engine got a fresh set of rings, valve job, gaskets, and seals. It runs great now, and looks pretty nice as well. Here is a video, and a few pics. Matt -
2 points
The Ardingly Small Holders Show
pmackellow and one other reacted to the showman for a post in a topic
Mr John Webster had an exhausting day at the show -
2 pointsGreat restoration and pictures . Prompts me to ask what is the history of the use of the Briggs design by the UK's Suffolk Iron Foundary for their 75 and 98 cc cast iron block engines. Was it a licensing agreement or did SIF buy the rights to redundant designs when Briggs moved on to alloy blocks for the smaller capacity engines. I'm not an engine collector as such but the attached images are of some SIF lumps ready to go onto my small collection of " working classics".
-
2 points
Drift Trike
Ian and one other reacted to Vinnetrow for a post in a topic
First layer of top coat went on today. Mostly black so its going to look stealthy, haha -
2 points
Been out foraging again
HeadExam and one other reacted to the showman for a post in a topic
I always fit my own tractor tyres, i have a tyre machine in my workshop and worked in tyre shop. The small ones are easy to do with levers and don't take long and as the usage is mainly on grass at the most at 7 or 8 mph they don't need balancing. As I'm really old , good used ones will see me out 😀😀😀 -
1 point
My Model N Collection all running at the same time.
Wallfish reacted to bowtiebutler956 for a post in a topic
This is something I've been wanting to do for awhile, and I finally did it yesterday. I pulled out all my old Briggs Model N's, as well as a Model U, Model I, and a 6s, and ran ran them all at the same time (22 engines). It was fun, although it was a bit more work than I thought it was going to be. When this many engines are running, its difficult to hear the exhaust note of each engine so that I could get the fuel mixture set correctly on the carburetor. In this video, the newest engine is a 1952, and the oldest is a 1940. There was one engine (my lever start) that I flooded, so it wasn't running in the first video, but I did eventually get it fired, and showed it running in the very short second video. Anyway, here are a couple videos and pics. Thanks Matt -
1 point
Just Finished Another Old Engine (Pincor)
bowtiebutler956 reacted to C-101plowerpower for a post in a topic
Want one? I believe i have a spare one in bits somewhere, oh and the 75g14 engines are the same size as a briggs 5s. There's a guy on YouTube that compared them and some parts were interchangable -
1 point
time to tedder
Stormin reacted to C-101plowerpower for a post in a topic
well this week my job was teddering the gras at my uncle's farm. i know you like pics so here are some -
1 point
-
1 point
Just Finished Another Old Engine (Pincor)
bowtiebutler956 reacted to HeadExam for a post in a topic
I said garden, but meant yard, i think a yard is a garden over in England, in Oklahoma and Texas a yard is where you park your boat , truck, camper, 4 wheelers and grill -
1 point
Just Finished Another Old Engine (Pincor)
HeadExam reacted to bowtiebutler956 for a post in a topic
Thanks, and they're really not to hard to find. Thats not my garden, its just the area behind my shop. I don't know what that is but, its indigenous to this area, and grows everywhere. While we're not in a drought right now, most years we are, and when all the grass dies, this stuff continues living. Matt -
1 point
Just Finished Another Old Engine (Pincor)
bowtiebutler956 reacted to HeadExam for a post in a topic
Beautiful job on the Pincor, I don't know how you guys find these old engines. Happy to see someone saving them though. BTW, strange question, what is the ground cover you have growing there in the garden? -
1 point
Just Finished Another Old Engine (Pincor)
bowtiebutler956 reacted to meadowfield for a post in a topic
Nice work, love the attention to detail and work you do -
1 pointWe had probs parking last year!!
-
1 pointFinally! After nearly a month of searching the country Ive managed to purchase another identical engine off ebay. The best news is the starter works perfect and the exhaust is much better than what Ive got. I had to pay strong money for it but it ticks over so smoothly.
-
1 pointTo get the column up though the top of the dash I needed to make a hole a bit bigger, so I quickly spun up this bung on the lathe. It fit's like so.. The small hole is for the "drill bit" bit of the cutter to slot into. Letting the dash cool down halfway through the cut. The amount of swarf that came out was amazing! A big hole.. With a bit of the body mount sliced out.. And the bottom of the dash surround notched a bit.. The steering box ended up right where I wanted it.. The steering box mount taking shape. That should work well The mount has now had two captive bolts and one captive nut added.. Both ends have been boxed in and the welds cleaned up, I just forgot to take any photos of it.. Likewise I have made a start on shortening the steering column but also forgot to take any photos.. I'd best remember Monday