Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 11/16/2014 in all areas

  1. 3 points
    Been out most of the weekend, but managed to finish the handbrake. Pretty pleased with yet another reuse of a wheel horse part and it works perfectly Here it is off and on
  2. 2 points
    This is my latest project what I have gained from a old bloke I know. I spent a couple of nights the past couple of weeks getting it running for him then he said he was selling it so I got it for a really good price. I'm going too take the trip mechanism off and make it hydraulic tipping and restore it
  3. 2 points
    Vinnetrow

    Project: 'TBD'

  4. 1 point
    Amongst many of my other projects I've been working with Sam and Nathan we have been looking at fitting hydraulics to the C121 , trying to think what will have a vee belt pulley on etc and knowing we're not going to need vasts amounts of pressure for what we're needing ( eventually it's going to be used for a three point hitch ) etc , so I've sourced a power steering pump off an old range rover 3.5 v8 engine . Which should be more than upto the job hopefully anyway , I've also gonna use if it has enough capacity a land rover pas resovoir, in order to mount the pas pump we had to dispense with the original exhaust to allow for room for the pump , here is what we have done so far !
  5. 1 point
    Since you used my proper name I might not lol
  6. 1 point
    yay, i was wondering why no one said it before
  7. 1 point
    Was just looking up mg5s the diesels were later than 1948.... Sounds like a great project!
  8. 1 point
    diggerjames

    Wheel horse C161

    Sam is over the moon with it got a lot of paper work with it and sales brochures!
  9. 1 point
    diggerjames

    Wheel horse C161

    Hi all me and Wheel horse Sam went and collected this today it's a nice looking machine it's wanting a few jobs doing to it and the paint work could do with sorting the first thing we noticed on getting it back that it wouldn't run just right , so we gave it a bit of work to do towing the 6 ft roller and it still wasn't happy so I decided to strip the carburettor and was I in for a shock the float bowl had been siliconed up etc so whe I stripped it down the in sides was full of silicone etc any way I cleaned it out put a new seal in and put it back on and it sounds a different machine!
  10. 1 point
    Yeah and it's red so he can't say I've got to buy one of them red things anymore lol
  11. 1 point
    next project then? you are as bad as DJ for buying more stuff
  12. 1 point
    meadowfield

    Wheel horse C161

    It should run ok straight thru rally - most of the pullers run straight
  13. 1 point
    nathanwhittaker

    Wheel horse C161

    Looks well can't u just leave it lol
  14. 1 point
    Stormin

    Wheel horse C161

    Looks quite tidy DJ. Like the exhaust.
  15. 1 point
    It will be a big suprise ayy
  16. 1 point
    the showman

    Happy Birthday Koen

    Happy Birthday Koen, hope you have a good day with lots of wheelhorse pressy's
  17. 1 point
    C-101plowerpower

    Happy Birthday Koen

    thanks chaps! my present was that my parents payed for the decals for the c101
  18. 1 point
    Robins

    Kohler Magnum 16 popping spluttering.

    Will do Andrew I haven't had an engine give me quite so many trials in a very long time! When an engine is sold to you and said only to be removed due to a broken starter motor and thats been replaced now, you wouldn't expect so many settings to be completely out of adjustment, i was daft really to disguard things thinking it can't be that as it apparently ran before. Lesson learned, always check anyway. I only checked most of them because im a bit of a perfectionist when it comes to the running of an engine
  19. 1 point
    Tom

    another project kubota 2201

    Very nice, I look forward to this. I have a 1501 kubota tractor and it's brilliant, it's only 15hp but pulls really well and the hydraulics are strong. Good luck with it. Tom
  20. 1 point
    Stormin

    another project kubota 2201

    I'd like to get my paws on one of those engines. One can dream.
  21. 1 point
    paul

    another project kubota 2201

    Where I work there are loads of watercress beds. They have always had kubotas and I dont think I have ever seen any break down yet. There is also quite a few dealers for them around this area. (Hampshire)
  22. 1 point
    meadowfield

    another project kubota 2201

    Nice find Nigel, look forward to the restore....
  23. 1 point
    pmackellow

    another project kubota 2201

    If you Google the model number there's a site called tractordata.com, very useful
  24. 1 point
    Triumph66

    another project kubota 2201

    I have always rated the Kubota garden tractor as the best on the market. I have bought several new ones over the years when I worked for the National Trust. Always reliable and does what it's supposed to do. I am trying to persuade one of my customers to buy a B series Kubota as the old Iseki one is beginning to play up.
  25. 1 point
    diggerjames

    another project kubota 2201

    Looks good Nigel I used to have A B7001 I think ! It was a good tool used to climb mountains !
  26. 1 point
    Ian

    The Workshop moving Thread

    Thanks Iain, yes it's certainly been an interesting story.. and a very busy story!! Too right Nigel and I will be having lot's of fun.. we have been already A bit of a sad video for you guy's and girls..
  27. 1 point
    paul

    same old barn different find

    Lister d finished now. Paul
  28. 1 point
    Ian

    My slightly warped look at Tractorfest

    Evening all, what a busy, hectic and fantastic weekend Tractorfest has been.. It has left me feeling shattered but I can't wait for next years show Anyway, my brain has been awake enough today to grab a few stills from my video footage for you all, I might of got a little carried away So let's start with Kev and his finger chasing a water leak on the Weeks.. One of those "Gulp" moments as I do my first ever talk over a PA system to the crowds! While the Showman ran off and hid from the microphone Steve made a valiant start on turning the soil in the working area with the Jobber.. But due to the show only being on for 2 days the reinforcements were called in Nigel and Noddy ploughing. This was Nigel's first time ploughing, by the end of the weekend he had it down to a fine art. Chris on his Trachorse doing a bit of leveling.. But even though he tried he didn't manage to bury the cameraman A Colbey doing it's soil turning stuff. I can't remember this chaps name (sorry of your reading this ), but he is a top chap, always willing to help and give advice about ploughing etc And this photo just because I like it.. Stay tuned as there is loads more to come.... I did say I got a little carried away grabbing screen shots
  29. 1 point
    Ian

    My slightly warped look at Tractorfest

    Back in the arena on Sunday, and here's Ethan and machine not being towed Only kidding mate, I know the machines fought you a bit over the weekend.. Why does this one remind me of the alien out of er... Aliens? The Weeks without the water leak..... I think it was scared of fingers The sound of this engine was just fantastic.. You could feel the rumbles through the ground. Lot's of chattering going on in the arena.. The Wheel Horse spinning display team entertain the crowds while trying not to hit each other It's the Wacky Racers
  30. 1 point
    paul

    PRESIDENT

    Had Titch down the other week so had most the collection out. Very nice to meet the man and can see why he is called Titch, but his good reputation is bigger. Paul
  31. 1 point
    paul

    PRESIDENT

    HI ALL just some more pics. I have sorted all the wheels and tyres out now, just need to put the wheel weights back on the front, hydraulics sorted out but think I might have to replace the seals(will see when up and running). Even the dog likes it as a sun hat Paul
  32. 1 point
    paul

    PRESIDENT

    Hi Shes coming on now. Paul
×
×
  • Create New...