Leaderboard
Popular Content
Showing content with the highest reputation on 01/16/2016 in Posts
-
3 points
Brrr it's cold, but it had to be fixed
jak3_smith and 2 others reacted to meadowfield for a post in a topic
After last nights episode trying to improve bendys transmission, I ended up resorting to swapping back to belts. I'd also noticed that as well as sluggish starting, it occasionally made a horrible grind So it was out with the engine, the starter is mounted low down on this k341 and you have to lift the engine out... And here's why I had to play with, the starter is a 10 tooth one, with only 7.5 teeth... the other is a high mount, and the other from the infamous acorn harvester at Ian's/Nigel's Fortunately it's a low mounter too, and the teeth are good. A few minutes later and voila, starts a million times better Frozen fingers sent me inside for the night. I was up first thing to defrost the car and thought I'd have a quick test drive. It's pretty cruel outside, kitchen isn't too warm either Bendy started first time, here's a few pics in the frost. I need more grip, might be digging the chains out... Didn't get stuck this time either -
2 points
Finally winter has arrived
Triumph66 and one other reacted to meadowfield for a post in a topic
To busy sledging to plough here -
2 points
Project C1-4x6
Vinnetrow and one other reacted to diggerjames for a post in a topic
Evening all another quick update , I've finally got the steering to as near as perfect as I can get it and u can steer it with one finger I haven got as much lock as the original tractor but not far off , I may still be able to obtain this with a few adjustments , I had a little drive on the tractor today in the work shop and every thing worked great so now I'm back to the fabrication part, because I'm thinking of putting a winch on the tractor I'm gonna put two 6volt batteries on wired in series to get my 12 volts I'm doing this for several reasons these batteries are very heavy so will act as good ballast , plenty of power and I have access to plenty of these batteries they have come out of a standby battery backup system they was 50 or so wired together to get mains voltage ,any way with me using two of these , I've made a battery Tray to mount them in under the seat ! Here's what I've done today -
2 points
Bolens Husky tractor
minky and one other reacted to Triumph66 for a post in a topic
Here's the latest update on my 1254 with its new boots. Thanks to my mate, Daniel Robins, for organising the work in her. I got to say that one mean looking machine! -
1 point
Martin Markham Colt Deluxe
wurzel reacted to pmackellow for a post in a topic
A friend of mine in the vintage tractor world rang the other evening asking if I know anyone who would be interested in a small tractor which was getting in the way in his garage. When he mentioned the make and model the radar went up as there were only 100 of these made (so it's rarer than a Mayfield Merlin) Wendy and I braved the ice and snow/rain/sleet for a short (6 mile) trip this morning to pick it up, it's a Martin Markham Colt Deluxe with a 10hp Kohler in it, these were made between 1965 and 1970 by Martin Markham in Lincolnshire. Also pictured is the brochure that arrived a few days ago. -
1 point
The Time Has Come... CC Original
Joe the small engine man reacted to Charlie Smith for a post in a topic
Hello All, As some of you will know I posted back earlier in 2015 saying that the cub cadet will have to sadly find a new home at the end of the year, well I know its the beginning of 2016 now but the time has come for me to part with this wonderful machine! It was restored by myself in 2013 so has the odd mark in the paintwork by now but after a good wash it shines up like new! its mechanically sound, starts, runs and drives lovely. You've all seen plenty of pictures of it by now and some of you have even seen it in the flesh, or shall I say tin however I shall upload more photos below. If anyone is interested send me a PM, we can have a chat. I'd rather it go to a good home on here than I would it go on eBay so thought I'd post this first! More pictures and info can be given if wanted. If wanted I will also include the transport box, tipping trailer and anything else I may come across. -
1 point
Martin Markham Colt Deluxe
HeadExam reacted to pmackellow for a post in a topic
Martin Markham in storage waiting for its first show outing... -
1 point
Ransomes MG2 number 137
nigel reacted to Anglo Traction for a post in a topic
Been following your dilemmas with this, and after you've tried multiple setups with various parts, I too am thinking along the lines of iffy condenser/connection and/or an Earthing problem. What is confusing me though is the sporadic run/firing you've had, maybe it is an inconsistent Earth/ground fault which prevents a Spark when the plug is fitted. Maybe a copper wire from the Cylinder Head to a good earth point will rule that out?. Best I can offer, as I know nothing about the Engine/Mag version you have. Really hope you find the 'Gremlin' soon to reward your high level of skills, patience and determination on an excellent project . -
1 point
Another sprayer for 2016 season
Triumph66 reacted to The Fife Plooman for a post in a topic
Hi all some pictures of my latest sprayer hope you like I am building exhibits for 2016 season -
1 pointSome thoughts on the belt issue. Possibly try using a cogged (not toothed) wedge belt, machining up a pair of deeper profile pulleys to retain the belt within the flanges when it twists and making up two raking fingers pointing into the open side of the pulleys to continuously remove debris before it builds up.
-
1 point
STOLEN CAMPERVAN Please keep a look out
pmackellow reacted to the showman for a post in a topic
Good news Paul. Good luck. Need any help give me a call -
1 point
Raider 16 4x4 articulated -aka project bendy
diggerjames reacted to the showman for a post in a topic
Why don't you use belts and make a cover for them to stop the grass and crap getting to them -
1 pointWorth checking that in air the spark is going from the centre electrode to the plug body and not the other what around due to polarity problems. Seen that with a coil ignition set up but not sure if it can happen with a mag.
-
1 pointThought you would have painted the edges RED Chris.
-
1 point
Woodstore / Shed makeover
Ian reacted to the showman for a post in a topic
As its been a nice and dry day I managed to finish the roof. Its had a good coats of adhesive and 2 layers of felt I warmed up the sides and used 80x80 plastic angle siliconed and nailed on then painted black as they only do white. Its all buttoned up and watertight and should stand the high winds we have here on the Southcoast. Next job is the front lower plate and make some doors.