C-101plowerpower

http://www.tecumsehpower.com/CustomerService/BSI.pdf i once got a mower in with one of those on, atco balmoral 17s i think it was, carb couldn't be dialled in. ended up drilliing out the jet and resoldering the hole with a sewing needle. ran fine after that

atco/tecumseh aq148

well, i'll stay away from ponds even more now, unless the pond in question is a wheel horse lets hope he gets well soon

that tractor on steel wheels is an twin city 20-35, exhaust is upside down on it

looking good so far as for the pull start, just wind it up till it fits again with the rope pulley thing, wind it up the way it would go when pulling the rope. once there is some good tension clap it down so the holes for the rope to go through line up and put the rope through. tie a knot in it so it wont go out the pulley and release the clamp, it should wind up the rope as far as it's needed. pull out the rope a bit, put the handle on and you're good to go. make sure you have enough rope because its very anoying to see the end of the rope dissapear in the pullstarter and having to start over again

nice pictures paul, all the wheel horses look great, just that one black horse, who would do that?

Vquad?

It has come a Long way since project zero-ish turn and the acorn shooter

http://en.plastidip.eu/spray/plastidip-matte-fluor/plastidip-spray-matte/

Good idea, id like me one of them if you still have one

i get them calls every once in a while, think it was last week i got a couple of them on one day, recognise the number and pick up and hung up imidiatly. now they started calling with a different number i usually ask them if they have a cactus nearby to stuff up where the sun don't shine

depends how much amps you blast through, you could use a car battery charger and wait around longer. or use a dc stick welder and blast lots of amps through and wait and hour or two

looks like the rowcrop did a nice job plowing, maybe take that one plowing next time Chris

fastest thing you can do to get more power out of that engine is removing it and put a bigger engine in place instead. offcourse you can rule out the governer and risk over revving it till the build in rev limiter kicks a hole in the engine.

meh, seen photo's of worse gearboxes. still not a nice sight to be greated with

hedge cutter

leave them, they're only original once. besides that they don't look like they need it anyway

that was what i thougt on the transmission side of things, but i wasn't sure

How much is he asking?

24 hours? that sounds awesome, 24 hours of le lawns?

i like the big IH crawler

usually scuffing up the paint is enought to get the paint to stick, might not be as proper as doing it from bare metal but it will work

and another bolens 1254 https://www.ebay-kleinanzeigen.de/s-anzeige/bolens-rasentraktor-schmalspurtraktor-husky-1254-01-tractor/462714193-84-7536

have a good one boss

I like the Pontiac, looks like the one from Smokey and the bandit