nigel 1,876 #626 Posted March 2, 2016 It makes it look like Noddy's car how many wheel horses had lights like that. I suppose if its painted yellow and red it would look OK . it looks meaner with out them 2 Triumph66 and Ian reacted to this Share this post Link to post Share on other sites
C-101plowerpower 548 #627 Posted March 2, 2016 I'd leave them off, looks a bit like the hotwheels car nobody wanted, sorry 3 nigel, Triumph66 and Ian reacted to this Share this post Link to post Share on other sites
Ian 2,417 #628 Posted March 5, 2016 They look poofy How an they, there's no pink fluffy dice in sight Toy Town I am afraid Iain. Well you did ask! Don't be afraid Andrew, I did ask indeed. Never mind those two. Look ok to me Ian. Thanks Norm. Look good to me Ian Thanks James. It makes it look like Noddy's car how many wheel horses had lights like that. I suppose if its painted yellow and red it would look OK . it looks meaner with out them I agree, it looks meaner without. I'd leave them off, looks a bit like the hotwheels car nobody wanted, sorry Don't be sorry Koen, I'm not sure about the hot wheels thing but I do think WN looks better without the lights.. Thanks for all you input guy's, just what I was after.. I think the lights will be staying off, I like the mean look me 2 nigel and Triumph66 reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #629 Posted March 5, 2016 I assume there is not room to put lights in the normal position Ian ?? 1 Ian reacted to this Share this post Link to post Share on other sites
Ian 2,417 #630 Posted March 5, 2016 I assume there is not room to put lights in the normal position Ian ?? There may be space but only just, it's a bit tight to say the least! Maybe rather than lights a pair of glowing evil eyes Thursday was spent taking WN apart.. A big thank you to Nigel for all you help, it certainly made the job a lot easier As the forklift is too tall to fit in my workshop, the bench (it was on a trolley which is now under the engine) went to the forklift.. Up goes the engine.. With the bench out the way.. The engine was lowered onto the trolley. The naked chassis... And a few of the parts which need cleaning and painting.. Speaking of paint, does anyone know which "Car colour" is closest to WH red? 1 S1g reacted to this Share this post Link to post Share on other sites
Alan 1,273 #631 Posted March 5, 2016 All that time spent building it, now it's broken already. Some people never look after anything. 2 S1g and Ian reacted to this Share this post Link to post Share on other sites
meadowfield 1,900 #632 Posted March 5, 2016 Sounds like I'm going to have to dream up some decals soon... 2 S1g and Ian reacted to this Share this post Link to post Share on other sites
Ian 2,417 #633 Posted March 5, 2016 All that time spent building it, now it's broken already. Some people never look after anything. It was nothing to do with me, Nigel did it while my back was turned Sounds like I'm going to have to dream up some decals soon... I'm thinking maybe in the style of the early Commando decals.. Although WN is kinda a Raider I don't think any of the Raider decals would suit the mean hot rod look.. 1 S1g reacted to this Share this post Link to post Share on other sites
Ian 2,417 #634 Posted March 10, 2016 4 Alan, Triumph66, S1g and 1 other reacted to this Share this post Link to post Share on other sites
diggerjames 543 #635 Posted March 10, 2016 Brilliant mate be nice to see her in paint and back together 1 Ian reacted to this Share this post Link to post Share on other sites
Wristpin 400 #636 Posted March 10, 2016 Speaking of paint, does anyone know which "Car colour" is closest to WH red? Have a look at Ford Carnival Red - may be!! 1 Ian reacted to this Share this post Link to post Share on other sites
Alan 1,273 #637 Posted March 10, 2016 Bet there will be a lot of "Where does this bit go" and "I'm sure something went here" when it's re assembly time. 3 Stormin, Ian and S1g reacted to this Share this post Link to post Share on other sites
Ian 2,417 #638 Posted March 11, 2016 Brilliant mate be nice to see her in paint and back together Thanks James, it will be good to see her in paint.. Can't wait Have a look at Ford Carnival Red - may be!! Was that the Ford red that faded? I think I need to go to Halfrauds and have a look in the paint department.. I'm guessing they still have space for a paint department in between all the kids push bikes and boy racer massive speakers? Bet there will be a lot of "Where does this bit go" and "I'm sure something went here" when it's re assembly time. There shouldn't be, all I need to do is read through this build thread I've got almost 1000 photos of the build.. It's been a slow week with WN, tidying welds, welding the odd place or two I had missed, and capping off loads of open box section.. I'm happy to say that despite the thrashing I have been giving WN, there has been no signs of any broken welds which could mean.. A - The chassis is a good strong design.. Or B - I've not been driving her hard enough.... Fully welded up and red oxide'd. I assume there is not room to put lights in the normal position Ian ?? I thought I'd find that out today Paul, so I dug a light backing plate/bulb holder out and screwed it to the bonnet.. It was close but not quite enough space... However if I trim a bit off the top of the light backing then it should just slide in 5 nigel, ranger, Alan and 2 others reacted to this Share this post Link to post Share on other sites
ranger 373 #639 Posted March 12, 2016 Ask Mark to make a headlight decal with two eyes you can cut out, then fit super bright 'RED' led's instead of white bulbs ! 1 Ian reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #640 Posted March 12, 2016 If the original light unit fits with modifications, personally I would go with that Ian, your tractor mate, your call 1 Ian reacted to this Share this post Link to post Share on other sites
Ian 2,417 #641 Posted March 13, 2016 Ask Mark to make a headlight decal with two eyes you can cut out, then fit super bright 'RED' led's instead of white bulbs ! Funny you should mention that Doug, I was talking with Nigel about evil looking red eyes rather than just the normal lights If the original light unit fits with modifications, personally I would go with that Ian, your tractor mate, your call I agree mate, the original light unit only needs a little trim to make it fit, so it makes sense to me A bit more of the WN story for you chaps.. With the chassis cleaned up and coated in the red stuff, I started to look at the vast amount of smaller parts that need cleaning up... Which got me thinking that I have a blasting cabinet and compressor both of which had not been used since I moved workshops well over a year ago! As the compressor is a tad on the large side the fear was the current drawn when starting it up would cause problems with the workshop wiring which could best be described as "needs work"! Anyway, nothing went bang or produced any smoke so a clutch pedal went into the blasting cabinet.... Not bad, maybe the blasting medium is a little coarse but we shall see what it looks like with a couple of coats of red oxide. Only a couple of problems with the blast cabinet... It needs to be raised by 6 inches or so so I'm not bent over using it.. And I need to sort out a dust extraction system as despite a good vent pipe it can get a bit hard to see what's going on.. I've just dug out a spare computer cooling fan which hopefully should suck out enough dust so I can see what I'm doing.. 5 ranger, Stormin, diggerjames and 2 others reacted to this Share this post Link to post Share on other sites
Ian 2,417 #642 Posted March 16, 2016 It's been a slow few days on WN, but slowly parts are getting put through the blasting cabinet and then hit with red oxide.. Dust extraction has still been an issue though, so I built this er... Thing... This kinda worked, doubling up the fan helped a bit more but is far from ideal.... And then yesterday I lifted the cabinet lid a little with the extraction fans on, and all the dust cleared in couple of seconds!! Me thinks another filtered hole in the side of the cabinet is needed!! 1 Stormin reacted to this Share this post Link to post Share on other sites
diggerjames 543 #643 Posted March 16, 2016 Great idea Ian 1 Ian reacted to this Share this post Link to post Share on other sites
Ian 2,417 #644 Posted March 17, 2016 Great idea Ian Thanks mate.. Well, you know what they say about blokes and instructions........ Today my mission was to get my blast cabinet working which meant sorting out the dust extraction once and for all.. After drilling a big hole and a couple of bolt holes in the side of the cabinet, I bolted this filter on that had been kicking about for years... It did come with the blast cabinet which I found a bit strange as the only "hole with bolt holes" was way bigger with 3 not 2 bolt holes.... So it got wrapped up in a random bit of paper and stuffed in a draw until today.. On the inside I folded up this cover to stop the inside of the filter from getting blasted away.. It was whilst bolting the inside cover on that I noticed this strange box like thing at the back of the cabinet under the light! Can you guess what's behind it? As it happens the space behind the cabinet is so tight the filter wouldn't of been able to let any air in anyway, so it kinda all worked out for the best! Oh... And the random bit of paper the filter was wrapped in all those years ago... Were the instructions! A few of the bits that have been blasted and coated in the red stuff.. As WN's dash panel had started to rust under the clear coat, it got blasted and hit with clear again.. It's a bit hard to make out but it almost looks like metallic silver only with more metallic showing.. Get it in the right light and it almost sparkles.. 6 S1g, ranger, Stormin and 3 others reacted to this Share this post Link to post Share on other sites
Ian 2,417 #645 Posted March 21, 2016 A few more photo's for ya all.. Freshly blasted and red oxided steering wheel boss and one of the brake drums. The air pressure was turned down so it only just took the old paint off without any damage to the dash surround.. The inside has already been re-reded if the is such a word The ally diff case was cleaned up using a soft-ish wire brush on a drill.... I may polish it up, I may not.. We shall see. The rest of the rear axle cleaned up and painted ready for it's top coat of black. Speaking of paint, it has been ordered and should arrive this week.. No clues to the colour/shade though Share this post Link to post Share on other sites
Stormin 4,458 #646 Posted March 21, 2016 Paint the diff, Ian. Easier than having to keep polishing it. 1 Ian reacted to this Share this post Link to post Share on other sites
nigel 1,876 #647 Posted March 21, 2016 Its pink 2 Ian and Stormin reacted to this Share this post Link to post Share on other sites
diggerjames 543 #648 Posted March 21, 2016 Looking good Ian I've just bought a cabinet blaster my self 1 Ian reacted to this Share this post Link to post Share on other sites
Wristpin 400 #649 Posted March 21, 2016 I've got a similar cabinet and have added an additional internal strip light and dust extraction connected to a Henry vacuum cleaner. Wondered why it was fogging up the other day and found that a bit of bubble wrap had got sucked onto the back vent! The draw back with these table mounted ones seems to be that the blasting medium does not flow back to the suction pipe and I have to keep tipping the cabinet to get it where its needed. Perhaps a central position for the pick up is what's needed ? 1 Ian reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #650 Posted March 21, 2016 The draw back with these table mounted ones seems to be that the blasting medium does not flow back to the suction pipe and I have to keep tipping the cabinet to get it where its needed. Perhaps a central position for the pick up is what's needed ? Now that's a good idea. Share this post Link to post Share on other sites
